Panasonic Toughbook CF-50 Series Reference Manual

Also see for Touchbook CF-50 Series: Operating instructions Operating instructions Operating instructions Manual Reference manual

55Setup UtilityEnter the User Password or Supervisor Password. If you have forgotten it, contactPanasonic Technical Support.Restart the Setup Utility with the Supervisor Password.Restart the Setup Utility with the Supervisor Password.Restart the Setup Utility with the Supervisor Password.[Enter Password] is dis-played[Advanced] or [Boot]menu can not be regis-teredSome items in [Security]menu can not be registeredF9 does not workDealing with Problems (Advanced)Unable to connect to anetworkWindows 2000When performing a copyoperation via a LAN cardwith a computer on thenetwork, an error mes-sage is displayed and thecopy operation failsThe sound is not heardConfirm that either [Modem] or [LAN] is set to [Enable] in the Setup Utility.When using the computer as a network computer, some additional settings mayhave to be made depending on the usage conditions. We recommend asking yoursystem administrator or the person in charge of the network.If the standby or hibernation mode is entered, the computer may have to be restarted.If the link lamp on the HUB unit is not on and the network cannot be accessed, setthe speed to match the HUB unit. ( page 40)The settings for the LAN card you are using may not be optimized. Confirm thiswith the following procedure.1 Select the network card you are using from [Network adapters] in [Control Panel]- [System] - [Hardware] - [Device Manager].2 Select [Advanced], select [Store And Forward] from [Property], then set [En-able] for [Value] if it is set to [Disable].(This item may be unavailable for some types of network cards.)Confirm that the computer on the network is operating properly and that the file isnot corrupt.NetworkTry changing the mute by pressing Fn + F4 or Fn + F6 .SoundOnly numbers can be in-puttedOnly capital letters arebeing inputtedHow to input Europeancharacters (ß, à, ç), sym-bols or Euro CurrencySymbol is unclearWindows 2000After resuming, input keysdo not work properlyKeyboardCheck whether the indicator is on. If it is on, the computer is in ten-key keyboardmode. To disable the ten-key mode, press NumLk .Check whether the indicator is on. If it is on, the computer is in Caps Lock mode.To disable the Caps Lock mode, press Caps Lock .Windows 2000Select [Start] - [Programs] - [Accessories] - [System Tools] - [Character Map].Windows XPSelect [start] - [All Programs] - [Accessories] - [System Tools] - [Character Map].The Character Map will be displayed. Point to the desired font name and select it.When the computer enters standby or hibernation mode while Alt , Ctrl orShift are held down, these keys may remain in “pressed” mode when the computerresumes operation. Pressing these keys once will return the keys to normal.Some applications do notwork properlyWhen switching to a different user with the Fast User Switching function, the followingproblems may occur.• Some applications may not work properly (for example, PDF files may not be printedproperly).• It may not be possible to set the settings of the display.• A serial mouse may not work.• Fn + F3 may not work.If any of the above occur, log on with the administrator authority again, not using theFast User Switching function, and try the operation once more.Fast User Switching function Windows XP

/ 58

Related manuals for Panasonic Touchbook CF-50 Series