Panasonic Toughbook CF-71 Series Operating Instructions Manual

Also see for CF-71 Series: Operating instructions Reference manual Reference manual Reference manual Reference manual

Contents

14 OperationWheel mode operations (almost identical tothe case of using the Microsoft® IntelliMouseTMfor scroll, zoom, etc., operations) are possiblefor Microsoft® wheel function-compatible ap-plications.Microsoft ® IntelliMouseTM is a mouse-type de-vice that, in addition to the two conventionalbuttons, incorporates a wheel able to rotateforwards/backwards.Using the Touch PadUse the touch pad to move the cursor on the display and perform normal computer operations.For instructions on how to handle the touch pad, refer to page 15.The touch pad has the following two modes of operation.Left ButtonRight ButtonWork SurfaceScrolling AreaMicrosoft® IntelliMouse TM Wheel Mode(Setting at the time of purchase)Only scroll operation is possible for appli-cations not compatible with the Microsoft ®wheel function.Even for applications compatible with theMicrosoft ® wheel function, there are caseswhere only vertical scrolling or only hori-zontal scrolling is possible in this mode.Scrolling side-to-sidePossible when a check markis added for [Horizontal].Scrolling up/down: Typical mouse operations use this area.When no check mark is added for [IntelliMouse Wheel mode], [Horizontal] and [Verti-cal] of [Scroll Configuration], the entire surface can be used for typical mouse opera-tions.Scrolling AreaScrolling up/downPossible when a check markis added for [Vertical].For the Pan and Auto Scroll functions, the entirework surface of the touch pad can be used for scroll-ing.Changing the mode of the touch pad1 Select from the taskbar or select [Motion] in [Start] - [Settings] - [Control Panel] -[Mouse].2 To set the Microsoft ® IntelliMouse TM Wheel modeAdd the check mark for [IntelliMouse Wheel mode] of [Scroll Configuration].To set the original modeDelete the check mark for [IntelliMouse Wheel mode] of [Scroll Configuration] andadd the check mark for [Horizontal] and/or [Vertical].3 Press [OK].NOTEWhen you are not sure whether an application is compatible with the Microsoft ® wheelfunction or not, try using both modes. Furthermore, depending on the application, there arecases where scrolling may not be possible with either mode.Original ModeStarting Up/Shutting Down