Panasonic Toughbook CF-71 Series Reference Manual

Also see for CF-71 Series: Operating instructions Operating instructions Reference manual Reference manual Reference manual

24CAUTIONCAUTIONUsing PC CardPC Card Utility Program1 Set [Sound Controller] to [Automatic (PnP)] in the Setup Utility.2 Select [Start] - [Run].3 Type [c:\util\drivers\pccard\setup.exe], press [OK], then follow the on-screen in-structions.About PhoenixCard Manager TM for Windows ® 95If a ZV card does not operate properly, install PhoenixCard Manager TM for Win-dows® 95 by following the procedure below, after uninstalling the driver or the appli-cation software for the card.Otherwise, do not perform the installation; abnormal operation may result.When running the power conservation function with the sound chip set,there may be no sound output. In this case, the following setting needs tobe made.In [Control Panel] - [Power] - [OPL3-SAx power management], set [Non PowerSave mode] then press [Apply]. Then press [OK]. ( page 41)After PhoenixCard ManagerTM for Windows® 95 has been installed, make sure topower off the computer before installing or removing the card. Also, do not usethe suspend or hibernation functions if the card is installed.Installing (only if the ZV card does not operate properly)UninstallingWhen you decide not to use the ZV card, be sure to perform the uninstall proce-dure.1 Uninstall PhoenixCard ManagerTM for Windows® 95 in [Start] - [Settings] - [Con-trol Panel] - [Add/Remove Programs].2 Restart the computer.3 Select [PC Card (PCMCIA)] in [Start] - [Settings] - [Control Panel].4 Press [Next] at the display for the [Display Driver Wizard for PC Cards (PCMCIA)],press [Next] again and then press [Finish].5 Shut down the computer by following the on-screen instructions.NOTE