Panasonic Toughbook CF-M34 Series Operating Instructions Manual

Also see for CF-M34 Series: Supplementary instructions Operating instructions Reference manual Supplementary instructions Reference manual

Contents

13 Getting Started3 Turn on your computer.4 Prepare 2HD floppy disks and make sure they arenot in the write-protected state, and then set it.5 Windows 2000Select [Start] - [Programs] - [Panasonic] - [CreateBackup Disk] and follow the on-screen instruc-tions.Windows XPSelect [Start] - [All Programs] - [Panasonic] - [Cre-ate Backup Disk] and follow the on-screen instruc-tions.6 Place a label identifying the contents on each disk.Name of created backup diskFIRSTAID FD (When the display for creating the UPDATE FD is shown, create thedisk by following the on-screen instructions.)CAUTIONStore the floppy disks in a safe place. They will enable you to return your com-puter to close to the condition at the time of purchase should any problems occur.When creating backup disks, do not run any other application program.When creating backup disks and the message [Insufficient files to copy] is dis-played, select [OK] and then contact Panasonic Technical Support.While the floppy disk drive indicator is on, do not remove the floppy disk,power down your computer or use the standby or hibernation function (“Standby/Hibernation Functions”).Be sure to create the backup disk.If a backup disk is not created, it will be impossible to return the computer to itsoriginal state. In this case, contact Panasonic Technical Support.The floppy disk drive must be the A drive.NOTE1 Power off your computer ( Page 16)Do not shut down using the standby or hibernation mode.2 Connect the external floppy disk drive to your computer.Create BACKUP Disks for ReinstallationLabel on the top surface,and insert the shutter-side headfirst. USB FloppyDisk Drive