Panasonic Toughbook CF-T8EWATZJM Reference Manual

Also see for CF-T8 series: Reference manual Reference manual Supplementary guide Reference manual Operating instructions

12Using the TouchscreenB Move the stylus away from the surface of the display.Moving the stylus away from the surface of the display before has not completely displayed will result in aleft click.z When needed, the above settings can be configured using the following procedure.A Click [start] - [Control Panel] - [Printers and Other Hardware] - [Tablet and Pen Settings] - [Pen Options].B Click [Press and hold] in [Pen Action] and then click [Settings].C In [Press and Hold Settings], change the settings and then click [OK].For more information, refer to “Help” in the bottom right corner of the [Press and Hold Settings]. Change the settings for the Touchscreenz When needed, the Touchscreen settings can be configured using the following proce-dure.A To Display [Pen and Touch] screen.Click on the notification area and click . And then click [Customize yourflicks settings].When is not displayed:Click (Start) - [Control Panel] - [Hardware and Sound] - [Pen and Touch],and add the check mark in [Display flicks icon in the notification area] in[Flicks].B Make necessary changes and click [OK].CAUTIONz If a change is made to the display resolution, or the cursor cannot be pointed correctly with the stylus, be sure to cali-brate the Touchscreen. (Î page 14)z When mouse drivers are installed (e.g., IntelliMouse), the touchscreen function may not be used.z When the operation of panning (only the internal LCD) is performed while the display resolution is set higher than theresolution of the internal LCD, the touchscreen function will not work properly.z Even when only an external display is in use, the cursor will move on the external display if the surface of the internal LCD istouched when the touchscreen driver is active. Therefore, do not touch the internal LCD when only an external display is in use.z The touchscreen function does not work in the Setup Utility, also in the “Full Screen” of [Command Prompt].NOTEz Do not move the stylus too quickly. If the stylus moves too quickly, the cursor may be unable to follow its movement.Windows 7