Panasonic Toughbook CF-U1GQG6L2M Reference Manual

Also see for Toughbook CF-U1GQG6L2M: Operating instructions Specifications Installation manual

96Hardware DiagnosticsBe.g. flash memoryCD4 Press Fn + B (F10).At the confirmation message, select [Yes] and press (Enter).The computer will restart.5 Press and hold Ctrl + Fn + K (F7) while [Panasonic] boot screen is displayed.When the PC-Diagnostic Utility starts up, it will automatically begin the diagnostic check for all hardware compo-nents.z If the password is requested, enter the password.z The internal keyboard cannot be used until alternating blue and yellow colors are displayed on the left side of thehardware icon (A).z By clicking the icon, you can execute the following operations:• : Start the diagnostic check from the beginning• :Stop the diagnostic check (You cannot restart the check partway through by clicking )• :Display help (click the screen or press Space to return to the original diagnostic checkscreen)z You can check the status of the diagnostic check by the display color on the left side of the hardware icon(A).• Aqua: Not running diagnostic check• Alternating blue and yellow: Currently running diagnostic check. The interval of the alternatingcolors differs depending on the type of diagnostic check currently running.During memory diagnostic check, the display may freeze for a long period of time. Wait until the process iscomplete.• Green: No problems discovered• Red: Problems discoveredNOTEz Using the following procedure, you can run a diagnostic check on a specified hardware component, or run anextended diagnostic check on the memory or the flash memory (The extended diagnostic check is only for thememory and the flash memory). The extended diagnostic check is more detailed, and so requires a longer periodof time to run.A Click to stop the diagnostic check.B Click the icon for the hardware that is not to be checked, so that the icon is displayed in gray (B).When running a check on the memory or the flash memory, clicking the icon once will turn on theextended diagnostic check (“FULL” (C) will be displayed below the icon); click again, and the iconwill be displayed in gray (D).C Click to start the diagnostic check.A