Panasonic UJ30 Series User Manual

Contents

Panasonic UJ30 Series User Manual Manual pdf 11 page image

1 Features of the ANUJ 3000/35001The ANUJ 3000/3500 is an UV curing device that quickly hardens UV resins (inks, adhesives, and coatings)via irradiation with UV light from an LED light source. The focused application of UV radiation to UV resinscoated on minute surfaces (2 to 3 mm dia.) such as the lenses of CD, MD, and DVD players, and the LCDpanels of notebook PCs, enables precise adhesion.■High-power irradiation: 10,000 mW/cm2 (with ANUJ6423 lens)Higher radiation intensity and a wider range of applications. Shorter production cycles.■Long LED life: 20,000 hours (LED life: Total irradiation time before UV intensity falls to 70% ofinitial value)At least six times longer LED life than a comparable lamp model, enabling reduced running costs.■UV curing without temperature increasesUses a single 365-nm LED UV light source that does not emit any infrared radiation, eliminating the risk ofheat damaging the workpiece.■UV intensity stabilizationUV intensity is kept constant, even if the ambient or LED temperature changes.■Easy-to-install LED headAt 12 mm dia. by 50 mm len., the LED is easy to mount on a jig. Mounting the LED head in place reducesoverheating and increases UV intensity.■No cooling fan, enabling cleanroom useThere is no need to deal with exhaust.■Programmable UV irradiation with four independently controlled headsEach LED head can be controlled independently. The heads can also be controlled all together or incombination. Up to eight different operation programs can be stored for each channel, including one programfor the constant intensity irradiation and seven programs composed of up to 10 steps each.1 Features of the ANUJ 3000/3500Up to 7 programs can be set.Program examplesSimple modeProgram 1 Program 7ConstantintensityUVintensityTimeInterval (closed)[Lamp type]Four units need to be installedseparately for processes 1 to 4.Process 1 Process 2 Process 3 Process 4One controller handles processes1 to 4.Process 1 Process 2 Process 3 Process 4Fiber