Issue 21 - February 2000 A-Series (UK)© Panasonic UK Ltd. - 28 - E & OEOne-Touch operationor1. Press the ON/OFF Key or lift Handset• You will hear internal Dial Tone.2. Press the desired One-Touch Key.To erase stored feature1. Press the ON/OFF Key• You will hear internal Dial Tone.• The ON/OFF indicator will light up2. Press MEMORY Key.3. Select the One-Touch Key you wish to erase.4. Press HOLD Key.5. Press the ON/OFF Key• The ON/OFF indicator will go outPauseUsing the REDIAL Key, a Pause can be inserted in the dialling sequence. The Pause time can bepre-programmed. For example, a pause can be inserted between, PBX line access number 9 andtelephone number. This is also available for Speed Dialling and One-Touch Key operation. OnePause (key operation) is counted as one digit.Numbers stored in One-Touch and Line Keys can have Pauses inserted into them.To insert a Pause6. Press REDIAL Key at place where Pause is desired.FlashBy pressing the FLASH Key, you can terminate an External or Internal Call. Having terminated theCall, you are automatiCally connected to an External line. If you wish to make a Call immediatelyafter another Call, without replacing the Handset press the FLASH Key and dial.Signal ConversionConverts the normal signalling method of Pulse to Tone dialling.Even if the telephone line is Pulse dialling, you can make Calls using Tone dialling by pressing the! Key before dialling the number. Replacing the handset on the cradle will automatiCally returnthe telephone to its original pulse signalling.