36LSQT1156Setup≥ Use the direction buttons (3,4,2,1) andENTER button in place of the joystick on themain unit.3 Press the MENU button to exitthe menu screen.Setting date and timeWhen the unit is turned on for the first time, amessage asking you to set the date and time willappear.≥ Select [YES] and press the joystick. Performsteps 2 and 3 below to set the date and time.If the screen shows the incorrect date and time,then adjust it.¬ Rotate the mode dial to select or.1 Press the MENU button, thenselect [BASIC] # [CLOCK SET]# [YES] and press the joystick.2 Move the joystick left or right toselect the item to be set. Then,move the joystick up or down toset the desired value.≥ The year will change as follows:2000, 2001, ..., 2099, 2000, ...≥ The 24-hour system is used to display the time.3 Press the joystick to enter theselection.≥ The clock function starts at [00] seconds whenthe joystick is pressed.≥ After pressing the MENU button to finish thesetting, check the date and time display.∫ Changing the date and time display stylePress the MENU button, then select [SETUP]# [DATE/TIME] # desired display style andpress the joystick.≥ You can also show or change the date andtime display by repeatedly pressing the DATE/TIME button on the remote control.(VDR-D310)∫ Changing the display stylePress the MENU button, then select [SETUP]# [DATE FORMAT] # desired display styleand press the joystick.MENUENTERMENU[DATE] [D/T][OFF]Display style Screen display[Y/M/D] 2007.12.15[M/D/Y] 12.15.2007[D/M/Y] 15.12.200715.12.2007 15:3015.12.2007LSQT1156_EN.book 36 ページ ２００６年１２月７日 木曜日 午後７時５３分
