Panasonic VDR VDR-D220 Operating Instructions Manual

Contents

Panasonic VDR VDR-D220 Operating Instructions Manual Manual pdf 87 page image

87LSQT1146With a computerConnection andrecognitionAfter the driver and software applications areinstalled, the unit must be connected to thecomputer and be correctly recognized by thecomputer.≥ Connect after installing the driver and softwareapplications.≥ If the supplied CD-ROM is inserted in thecomputer, remove it. (If the [Setup Menu] isrunning, wait until it finishes, then remove theCD-ROM.)≥ If the recognition procedure is notaccomplished properly, operation will not bepossible after connecting the unit to thecomputer.≥ If the unit fails to operate normally, it may meanthat you have not conducted the installation orrecognition procedure properly.≥ Be sure to finalize DVD-RW (VR format),DVD-RW (Video format) and DVD-R on thisunit, before using them on the computer.Un-finalized discs will not be recognized bythe computer.¬ Connect this unit to the AC adaptor.1 Insert a disc or card withrecorded images in the unit, thenturn on the unit.2 Connect this unit and acomputer.A USB cable (supplied)≥ Insert the plugs as far as they will go. The unitand computer will not operate properly if theplugs are not inserted fully.≥ Do not use any other USB cables except thesupplied one. (Operation is not guaranteedwith any other USB cables.)The USB function selection screen will appear.3 Select [PC CONNECT(DISC)] or[PC CONNECT(CARD)] and pressthe joystick.This unit is automatically recognized by thecomputer.≥ When the unit is connected to a computer,its power cannot be turned off.In this case, disconnect the USB cable (l 89).≥ If the unit is connected to a computer when theUSB function is set to [PC CONNECT(DISC)],no image will appear on the LCD monitor or theviewfinder.≥ When this unit is connected to a computer, youcannot use this unit’s DISC EJECT lever toremove a disc. Use Windows Explorer to right-click the drive icon for this unit and select[Eject].≥ When a computer is accessing a disc or card inthis unit, the ACCESS/PC lamp or card accesslamp lights. (When a card is being accessed,appears on the LCD monitor.) Do notdisconnect the USB cable or AC adaptor whilethe disc or card is being accessed as it maydamage the data.Connection and recognitionproceduresA