Panasonic VIERA TH-42PX64E Operating Instructions Manual

Contents

AdvancedControl with HDMISetup menuAV2Q-LinkTOPOnAV2 out MonitorOffOffSide panelPower saveSystem languageTuning menuShipping conditionTeletextText language WestOff timer OffIDTVMENUOKMENU26 27Select "On" (default is On)External EquipmentQ-Link interlocks the TV unit and VCR / DVD recorder, enables easy recording and playback.■ Condition■ Features availableSome recording equipments are not applicable. Read the manuals of the equipment.What yousee isWhat yourecordInformation/ MessagePoweron linkand EasyplaybackPower offlinkRecording information or if recording is not possible, a message is displayed.(Only when the programme number is "0" or "AV mode" for some equipment.)Insert a videocassette or DVD in the recording equipment and it is operated, TVis turned on and input mode is switched automatically so that you can view thecontent. (Only when TV is in Standby mode.)When TV is set to Standby mode, the recording equipment is also automaticallyset to Standby. (Only when the videocassette or DVD is not active.)• Use the VCR / DVD recorder with the following logos:"Q-Link", "NEXTVIEWLINK", "DATA LOGIC", "Easy Link", "Megalogic", or "SMARTLINK"• Connect the equipment to this unit’s AV2 or AV3 terminal via a "fully-wired" SCART cable. (p. 28)• Q-Link terminal setup in Setup menu (Q-Link, AV2/AV3 out). (p. 16)• External EquipmentQ-LinkSelect "Setup menu"Select "Control with HDMI"213Display the menu∗Enjoy additional HDMI Inter-Operability with Panasonic products which have "HDAVI Control" function.HDMI connections to some Panasonic equipments (Panasonic DVD Recorder DIGA, Panasonic Playertheatre, Panasonic Amplifier, etc.) allow you to enjoy the easy playback or home theatre.About connections, see "Connections" (p. 29). Read the manuals of the equipment too.Non-HDMI-compliant cables cannot be utilized.About applicable equipments, consult your local Panasonic dealer.nextselectselectEasyplayback Automatic Input switching-When the connected Panasonic equipment is operated, inputmode is switched automatically. When it is stopped operating, input mode is returned.Power onlink When the connected Panasonic equipment is operated, TV is also automaticallyturned on and the content is reproduced. (Only when TV is in Standby mode.)Power offlink When TV is set to Standby mode, the connected Panasonic equipment is alsoautomatically set to Standby.selectTheatrespeakerControl with HDMI " Control"∗After connections turn the equipments on and then, switch the TV unit on.4Main menuPicture menuSound menuSetup menuHome theatre• "DATA LOGIC" (a trademark of Metz Corporation) • "Megalogic" (a trademark of Grundig Corporation)• "Easy Link" (a trademark of Philips Corporation) • "SMARTLINK" (a trademark of Sony Corporation)Read the manuals of the equipment too.■ Download analogue channel settings• Perform Auto setup. (p. 20)When first using this unit, see "Auto Setup". (p. 9)• Perform download to the equipment. (p. 20)EXITDIRECTTV RECDirect TV Recording:Recording the current programme in VCR / DVD recorder immediately.■ To change DVB channel, stop recordingEXIT• When Direct TV Recording is performed, therecording equipment is automatically turned on if itis in Standby mode.• The recording equipment is recording from its owntuner. You can turn the TV off during recording(Analogue only).• Do not turn the TV off during recording AV source.Otherwise the recording will be stopped.• When Direct TV Recording is performed whilewatching DVB channel, the DVB programmeposition is locked and no other DVB channel canbe selected. (but not for the Analogue channel.)DIRECTTV RECMain menuPicture menuSound menuSetup menuHome theatreYou can control the theatre speaker with TV’s remote control.This function is available when Panasonic Amplifier or Player theatre is connected.nextDisplay the menu MENUSelect "Home theatre" or "TV speaker"■ Home theatre:• When selecting "Home theatre", the sound of TV speakers is mute.• When the equipment is turned off, TV speakers will be active.Volume up / downMute■ TV speaker:selectAdjustment for equipment (automaticallyturned on if it is in Standby mode)TV speakers are active.