Panasonic VIERA TH-42PX64E Operating Instructions Manual

Contents

FAQs, etc.34 35Technical Information SCART and S-video terminal informationInput signal that can be displayedSocket EarthCVBS out (video)CVBS earthRed inRed earthGreen inGreen earthBlue inBlue earthAudio out (L)Audio out (R)CVBS in (video)RGB status earthStatus RGBEarth----Status CVBSAudio in (L)Audio earthAudio in (R)211917151311975312018161412108642■ AV1 SCART terminal(RGB, VIDEO)Suitable inputs for AV1 include RGB (Red / Green / Blue).Socket EarthCVBS out (video)CVBS earthS.C. - inEarth--Earth--EarthAudio out (L)Audio out (R)CVBS in (video)Earth--Earth--Q-Link dataStatus CVBSAudio in (L)Audio earthAudio in (R)211917151311975312018161412108642■ AV2 SCART terminal(VIDEO, S-VIDEO, Q-Link)AV2 - Pins 15 and 20 are dependent on AV2 S-VHS /VIDEO switching.Chrominance inSocket EarthCVBS out (video)CVBS earthRed in, S.C. - inRed earthGreen inGreen earthBlue inBlue earthAudio out (L)Audio out (R)CVBS in (video)EarthStatus RGBEarth--Q-Link dataStatus CVBSAudio in (L)Audio earthAudio in (R)211917151311975312018161412108642Luminance inChrominance earth Luminance earth■ AV4 S-VIDEO 4 pin terminal■ AV3 SCART terminal(RGB, VIDEO, S-VIDEO, Q-Link)AV3 - Pins 15 and 20 are dependent on AV3 S-VHS /VIDEO switching.∗ Mark: Applicable input signal for Component (Y, P B, PR ), HDMI and PC (D-sub 15P)Note • Signals other than above may not be displayed properly.• The above signals are reformatted for optimal viewing on your display.Signal name Horizontalfrequency (kHz) Verticalfrequency (Hz) Component HDMI PC525 (480) / 60i 15.73 59.94 ∗ ∗525 (480) / 60p 31.47 59.94 ∗ ∗625 (576) / 50i 15.63 50.00 ∗ ∗625 (576) / 50p 31.25 50.00 ∗ ∗750 (720) / 60p 45.00 60.00 ∗ ∗750 (720) / 50p 37.50 50.00 ∗ ∗1,125 (1,080) / 60i 33.75 60.00 ∗ ∗1,125 (1,080) / 50i 28.13 50.00 ∗ ∗640 × 400 @70 Hz 31.46 70.07 ∗640 × 480 @60 Hz 31.47 59.94 ∗640 × 480 @75 Hz 37.50 75.00 ∗800 × 600 @60 Hz 37.88 60.32 ∗800 × 600 @75 Hz 46.88 75.00 ∗800 × 600 @85 Hz 53.67 85.06 ∗1,024 × 768 @60 Hz 48.36 60.00 ∗1,024 × 768 @70 Hz 56.48 70.07 ∗1,024 × 768 @75 Hz 60.02 75.03 ∗1,024 × 768 @85 Hz 68.68 85.00 ∗1,280 × 1,024 @60 Hz 63.98 60.02 ∗Macintosh13” (640 × 480) 35.00 66.67 ∗Macintosh16” (832 × 624) 49.72 74.54 ∗Macintosh21” (1,152 × 870) 68.68 75.06 ∗• Technical InformationHDMI connectionPC connectionPin No. Signal Name Pin No. Signal Name Pin No. Signal NameR GND (Ground) NC (not connected)G GND (Ground) NC (not connected)B GND (Ground) HD/SYNCNC (not connected) NC (not connected) VDGND (Ground) GND (Ground) NC (not connected)A PC may be connected to this TV unit so that the PC screen is displayed and sound is heard from the TV.• PC signals that can be inputted: Horizontal scanning frequency 31 to 69 kHz; vertical scanning frequency59 to 86 Hz (more than 1,024 signal lines could result in incorrect display of the image).• A PC adapter is not necessary for the DOS/V-compliant D-sub 15-pin connector.Note• Some PC models cannot be connected to this TV unit.• For details of the applicable PC signals, see p. 35.• Max. display resolution• D-sub 15-pin connector signalTH-42PX64E4:3 768 × 768 dots16:9 1,024 × 768 dotsAspect Model No.167839451015 14 13 12 112• HDMI is the world's first complete digital consumer AV interface complying with a non-compression standard.• If the external equipment has only a DVI output, connect to the HDMI1 terminal via a DVI to HDMI adapter cable (∗2).• When the DVI to HDMI adapter cable is used, connect the audio cable to the audio input terminal.• Audio settings can be made on the "HDMI1 input" menu screen. (p. 16)• Applicable audio signal sampling frequencies (2ch L.PCM): 48 kHz, 44.1 kHz, 32 kHz(∗1): The HDMI logo is displayed on an HDMI-compliant equipment. (∗2): Enquire at your local digital equipment retailer shop.HDMI (high-definition multimedia interface) allows you to enjoy high-definition digital images and high-quality soundby connecting the TV unit and the equipment.HDMI-compatible equipment (∗1) with an HDMI or DVI output terminal, such as a set top box or a DVD player, canbe connected to the HDMI terminal using an HDMI compliant (fully wired) cable.Note• HDMI2 terminal is for digital signal only.• Use with a PC is not assumed.• The 720p/1080i signals will be reformatted before being displayed on the screen.• If the connected equipment has an aspect adjustment function, set the aspect ratio to "16:9".• These HDMI connectors are "type A".• An equipment having no digital output terminal may be connected to the input terminal of either "Component", "S-VIDEO", or "Video" to receive analogue signals.• The HDMI input terminal can be used with only the following image signals:480i, 480p, 576i, 576p, 720p and 1080i. Match the output setting of the digital equipment.• For details of the applicable HDMI signals, see p. 35.Control with HDMI• Setup the equipment to enable this function. Read the manual of the equipment.• Switch the TV unit on again with the equipment on when connection or setup is changed.• This function may not work normally depending on the equipment condition.• The equipment can be operated by TV’s remote control with this function on even if TV is in Standby mode.• Image or sound may not be available for the first few seconds when the playback starts.• Image or sound may not be available for the first few seconds when Input mode is switched.• Volume function will be displayed when adjusting the volume of the equipment.• Easy playback is also available by using the remote control for Amplifier. Read the manuals of Amplifier.HDMI connections to some Panasonic equipments allow you to enjoy the easy playback or home theatre.

/ 20

Related manuals for Panasonic TH-42PX62E