Panasonic VL-GM201A Installation And Operation Manual

Contents

18Introduction and InstallationTo attach the power cableL While pressing on the button with a pointed object such as a screwdriver, insert the powercable into the terminal connector.L To disconnect the power cable, press on the button while pulling out.L To attach an optional power cable, cut off about 12 mm ( 1/ 2 ") of the cable cover (1), thenpush in firmly until the end of the cable is securely inserted into the power connectionterminal (2).To attach the wiresL Strip off of the wire cover so that about 9 mm ( 3 /8 ") of the wire is exposed.L While pressing on the button with a pointed object such as a screwdriver, insert the wire intothe terminal connector.L To disconnect a wire, press on the button while pulling out.Monitor station DC terminal1 2 Power cable cross sectionButtonTerminal connectorButtonTerminalconnector12 mm( 1 /2 ")Correct IncorrectButton Terminal connector