Panasonic VL-SA74CX Quick Start Manual

Also see for VL-MA74CX: Installation guide

1.5 Loop MonitoringThe device can loop monitor all the outdoor units and CCTV cameras if connected, and during this time,image/video will be saved according to the time you select. When current time for monitoring outdoor unit/camerais over, it will automatically switch to next one.When a loop monitoring is over, it will start a new one.The sequence is Door1→Door2→Camera1→Camera2→Door1….and so on.The device will skip the outdoor unit or camera if not connected.Select 10s/30s/60s to monitor each outdoor unit and CCTV camera.Note: To save videos, Micro SD card is needed, otherwise it will only record images. The device will onlysave 1 image for each outdoor unit and camera each time.Enable motion detection: Enable/disable motion detection function.Camera selection: Select camera for motion detection (select from Door1/2).Recording format: Select file recorded as photo/video.Sensitivity setting: Sensitivity for motion detection can be set as high/middle/low.Screen ON when motion detected: When camera detects motions, the monitor will show the image of theoutdoor for 60s.●When loop monitoring function is ON, motion detection will not work.●In night or dark place, the LED of door camera is always ON while this function is working.Note: This product is only an intercom system, and it cannot totally replace CCTV. Please do not turn onthis function if not necessary.①②③④⑤20OFF60sON6. Settings