Panasonic VL-SVN511 Series Operating Instructions Manual

Also see for VL-SVN511 Series: Installation guide Installation guide Operating instructions Manual Quick start guide

8.4.2 Registering your mobile device to themain monitorFor more information about registering mobile devices,refer to the operating instructions for the [VideoIntercom] app.Mobile device operations1. Start the [Video Intercom] app.2. Read the displayed license agreement and tap[Agree].¯Main monitor operations1. Top menu ® ® .2. Select “Register/Cancel” ® .3. Select “Register” ® .4. Select the mobile device registration number ®.¯Mobile device operationsComplete these operation within 2 minutes.1. Read the displayed message and tap [Register].R A beep sounds when registering is completed.¯Main monitor operations1. Press M N.8.4.3 Cancelling the mobile device from themain monitorIf you do not plan on using the [Video Intercom] app anylonger, we recommend cancelling the mobile device fromthe main monitor.1 Top menu ® ® .2 Select “Register/Cancel” ® .3 Select “Cancel” ® .4 Select the mobile device registration number ®.5 Press M N.8.5 Using email featuresThe main monitor can send a doorphone image via emailwhen someone presses the call button, and send anemail message when a sensor is triggered.8.5.1 Email features preparation overview1 Connect the main monitor to your Wi-Fi network(page 23).2 Gather the following information.– The email address (your email address) that youwant to use for sending email messages from themain monitor. Note that mobile phone-exclusiveaddresses cannot be used.– The email server name (typically starts with"SMTP") associated with the email address– The SMTP port number used to send email– The type of encryption used by the email server(such as TLS/SSL, or none)– The SMTP authentication user name and securitykey used by the email server (not required for allemail servers)3 Register the email server and notification emailaddresses (page 25).Note:R The main monitor must be connected to a Wi-Firouter that is connected to the Internet in order to useemail feature.R Messages sent from the main monitor may not beable to be received if they are treated as spam by thedestination email account. Configure the emailaccount so that email from the main monitor can bereceived.R Email may not be able to be sent depending on thecondition of the network.R You can also configure email features using the[Video Intercom] app.8.5.2 Registering the email server1 Top menu ® ® .2 Select “Network” ® .3 Select “Email settings” ® .4 Select “Email server registration” ®.5 Enter the sender email address ® select ®.6 Enter the SMTP server address ® select ®.7 Enter the port number ® select ® .8 Select the security type ® .258. Wi-Fi, mobile devices, and email