Connecting to other equipment- 166 -Printing the PicturesIf you connect the camera to a printer supporting PictBridge, you can select the pictures tobe printed out and instruct that printing be started from the camera’s LCD monitor.• Some printers can print directly from the card removed from the camera. For details, refer tothe operating instructions of your printer.Preparations:Turn on the camera and the printer.Remove the card before printing the pictures in the built-in memory.Perform the print quality and other settings at the printer before printing the pictures.Set the mode dial to anything except [¨].A USB connection cable (supplied)• Check the directions of the connectors, and plug them straight in or unplug them straight out.(Otherwise the connectors may be bent out of shape which may cause malfunction.)B Align the marks, and insert.• Use a battery with sufficient battery power or the AC adaptor (optional). When using the ACadaptor (optional), use the multi conversion adaptor (optional). If the remaining battery powerbecomes low while the camera and the printer are connected, the alarm beeps. If this happensduring printing, stop printing at once. If not printing, disconnect the USB connection cable.Connect the camera to a printer via the USB connection cable A(supplied).• When the camera is connected to the printer, the cable disconnect prohibit icon [å]appears. Do not disconnect the USB cable while [å] is displayed.Press 3/4 to select [PictBridge(PTP)], and thenpress [MENU/SET].DIGITALAV/ /MULTIUSB MODESELECT SETPLEASE SELECTTHE USB MODEPictBridge(PTP)PC
