Panasonic Viera DT50A series Operating Instructions Manual

Contents

Viewing 3D images38■ To change 3D format manuallyWhen the image is not changed properly using [3D], [2D] or [2D 3D] mode, use this manual setting.During the above operation Select the mode2D 3D3D Mode Selection (Manual)Top and Bottom - 2DTop and Bottom - 3DSide by Side - 2DSide by Side - 3DFrame Sequential - 2DFrame Sequential - 3DOriginalselectset[Original]:Displays the source image as it is.● Use to identify the format type of the source image.“Table of images that can be seen for each [3D Mode Selection (Manual)] and the source image format”(see below)[Frame Sequential - 3D] / [Frame Sequential - 2D] / [Side by Side - 3D] / [Side by Side - 2D] /[Top and Bottom - 3D] / [Top and Bottom - 2D]:Displays the mode you select.● Not valid on Analogue TV and AV mode[2D 3D]:Converts 2D images into 3D.● Please note the 3D images appear slightly different from the originals.● Using this function for profit-making purposes, or publically showing images converted from 2D to 3D in placessuch as shops or hotels etc. may infringe on the rights of the copyright holder protected under copyright law.Table of images that can be seen for each [3D Mode Selection (Manual)] and the source image formatIf the picture appears to be abnormal, refer to the table below to choose the correct 3D mode.[3D Mode Selection]Sourceimage format[Original][FrameSequential- 3D][Side by Side- 3D][Top andBottom - 3D] [2D 3D]Frame SequentialNormal 3D∗1Side by Side (Full)Normal 3D∗1Side by SideNormal 3D∗1Top and BottomNormal 3D∗1Normal format (2D)Normal 3D∗1: When selecting [Frame Sequential - 2D], [Side by Side - 2D] or [Top and Bottom - 2D], the images will be displayedwithout 3D effect.● Depending on the player or broadcasts, the image may be different from the above illustrations.If■●