Panasonic Viera DT50A series Operating Instructions Manual

Contents

Tuning and Editing Channels52Set all channels automatically [Auto Tuning]Automatically retune all channels received in the area.1 Start Auto Tuning 2 Settings are made automaticallyExample: Digital TV Example: Digital TVDigital TV Auto TuningAll digital TV tuning data will be erasedCH 6 69TV Fin landBoxer NavigatorSVT HD999323232SearchingDigital TV Auto TuningScanThis will take about 3 minutes.RF Ch Channel Name Type QualityDigital TV: 4Digital TVDigital TVDigital TV● All the previous tuning settings are erased.● When the operation is completed, the channel at the lowest position will be displayed.● Search begins in the order from the lower channels to the higher channels.● If tuning has not been done completely [Manual Tuning] (see below)Set Digital TV channel manually [Manual Tuning]Normally use [Auto Tuning] or [Update Channel List] to retune Digital TV channels.If tuning has not been done completely or for adjusting the direction of the aerial or dish, use this function.● All channels found will be added to the Channel List.474.00[CH21] MHz001010Digital TV Manual TuningPhysical ChannelSignal QualitySignal StrengthNo. Channel Name Type NewDigital TV: 0select physical channelselect offsetstart tuningSet Analogue TV channel manually [Manual Tuning]Set Analogue TV channel manually after Auto Tuning.● If a VCR is connected only with the RF cable, select channel position [0].CH 5700 75Analogue TV Manual TuningManual TuningStore1 Select the channel position 2 Select the channel3 Search 4 Select [Store]selectstoreYliSSAU●●●EF123