Panasonic Viera TC-P50VT25X Operating Instructions Manual

Also see for TC-P50VT25X: Operating instructions

Contents

Panasonic Viera TC-P50VT25X Operating Instructions Manual Manual pdf 16 page image

16Press to return tothe previous screenConfigure Network settingsSelect the Network typeNetwork settings Step 5 of 6Checks for proper network connection,settings and communication to the Internetand server automatically.RETURNOKSelectAutomatic ManualNetwork settings Step 5 of 6Selects Ethernet cable or wireless network. Ifyou select “set later” and want to repeat theNetwork settings, select “Network settings” inthe Setup Menu.Ethernet cable Wireless (WiFi) Set laterRETURNOKSelectLANSelect the setting modeNetwork settingsConnection testStep 5 of 6Check Ethernet cable connectionValidate IP addressCheck for IP address duplicationCheck connection to the InternetCheck communication with VIERA CAST server.Test in progress...RETURNStart connection testConnection testManualConnectionerrorNetwork settingsPress OK to continue.RETURNOKNetwork settings are complete.You can use VIERA CAST.VIERA CAST lets you enjoy Internetcontents on your VIERA TV.Set later: Go to 6You can set in “Setup” menu later.Wireless (WiFi) : Start “Wireless network” (p. 17)Automatic: Press OK to start setup automatically.Error screen is displayed whenNetwork connection has failed.Manual: Go to Manual setting.Manual settingError screenComplete “Network settings”Helpful information is displayed when yousuccessfully complete “Network settings”.Network settings Step 5 of 6IP setting modeSubnet maskIP addressDefault gatewayPrimary DNSDNS setting modeSecondary DNSConnect testProxy addressProxy portAutomatic255.255.255.0192.168.0.4192.168.0.1192.168.0.1Automatic221.184.25.24900-00-aa-cc-33-abRETURNChangeSelectMac addressNetwork settingsConnection testStep 5 of 6Try again?Checks for proper network connection,settings and communication to the Internetand server.Check Ethernet cable connectionValidate IP addressCheck for IP address duplicationCheck connection to the InternetCheck communication with VIERA CAST server.Connection to local network (router) failed.Ensure wireless network availabilityRetry Manual Set laterRETURNOKSelectManualAutomaticRetry: Go to “Start connection test”Set later: Go toAbout wireless LANWireless LAN adapter and Access point need to be obtained separately.For the latest information on applicable LAN adapters, check the following website:http://panasonic.jp/support/global/cs/tv/Check that the Access point supports WPS*.(If it does not support WPS, the encryption key of the Access point is required when configuring settings.)Follow the instructions on the Access point setup screen and configure the appropriate security settings.For more details on setting of Access point, please refer to operating manual for the Access point.We recommend using 11n (5 GHz) for the wireless system between the wirelessLAN adapter and Access point.Communication is also possible with 11a, 11b, and 11g (2.4 GHz), but thecommunication speed may be slower.If the wireless system of the Access point is changed, devices that could connect bywireless LAN may no longer be able to connect.When VIERA CAST or other device is using the network, do not disconnect thewireless LAN adapter.Keep the TV away from the following devices as much as possible:Wireless LAN, Microwaves, and other devices that use 2.4 GHz and 5 GHz signals.Otherwise, the TV failures such as malfunction may occur due to the radio wave interference.* WPS: Wi-Fi Protected SetupFirst Time Setup (Continued)