Panasonic Viera TH-32LRG20E Operating Instructions Manual

Also see for TXL32U2E: Operating instructions

EXITMENUINPUTTVjklghi mnotuvpqrs wxyzabc def38Timer ProgrammingTimer Programming from MenuThe Timer Programming menu allows you to choose programmes that you wish to record or remindwatching. At the correct time, the TV will switch on and tune to the correct channel even if the TV is inStandby mode.TV Guide may also be used to set timer programming (p. 19) .This function is not available in Analogue mode.●Timer Programming does not work properly if the TV does not acquire the correct time data from the TV signal.●The TV must be either On or in standby for Ext Rec. of Timer Programming.●No other channel can be selected while Ext Rec. of Timer Programming is in progress.●It may not be possible to record an encrypted programme (which is copy-protected).●When recording programmes, be sure to make the proper settings on the recorder connected to the TV.●If a compatible recorder with Q-Link, VIERA Link or similar technologies is connected to the TV (p. 52 and p. 53)and the “Link Settings” (p. 28) are completed, no setting of the recorder is required. Also read the manual of therecorder.If the recorder is not compatible with Q-Link, VIERA Link or similar technologies make timer programming of the●recorder. For preparations of a recorder, read the manual of the recorder.Recording is possible in composite video via SCART only, including HD content.●2 mins. before the starting time, a reminder message appears if you are watching TV.●To remove the message and start the programming•To cancel the programming• EXIT1 Select the mode you want to setp. 14TV2 Display the menuMENU3 Select “Setup”Main MenuPictureSoundSetupaccessselect4 Select “Timer Programming”Setup Menu 1/2Off Timer OffAccessLink SettingsChild LockDVB-C Tuning MenuLanguageDisplay SettingsCommon InterfaceSystem MenuTimer Programmingaccessselect5 SetTo return to TV■ EXITTo unlock the tuner■(stop recording)EXIT