Advanced45Displaying PC Screen on TV● Updating the TV Software●EXITDIRECT TV RECASPECTOPTION RETURNTEXT STTL INDEX HOLDMENU NINPUTTV AVDisplaying PC Screen on TV1 Select the external inputAV2 Select “PC”Input SelectionAV1/SAV2COMPONENTPCHDMI1HDMI2TVaccessselectCorresponding signals● p. 64If “H-freq.” or “V-freq.” is shown in red,●the signals may not be supported.The screen of the PC connected to the TV can be displayed on the TV.You can also listen to PC sound with the audio cable connected.To connect PC● p. 59To return to TV■ TVPC menu setting■ (changed as desired)To make settings● “How to Use Menu Functions” to (p. 25)Menu Item Adjustments / Configurations (options)PictureAdvancedPCSettingsR-Gain Adjusts the white balance for red areasG-Gain Adjusts the white balance for green areasB-Gain Adjusts the white balance for blue areasR-Cutoff Adjusts the white balance for red areasG-Cutoff Adjusts the white balance for green areasB-Cutoff Adjusts the white balance for blue areasGamma Switches the gamma curve (1.8 / 2.0 / 2.2 / 2.4 / 2.6)Reset toDefaults Press the OK button to reset to the default Advanced PC SettingsSetupPCSetupInputResolutionSwitches to a wide viewVGA (640 × 480 pixels), WVGA (852 × 480 pixels),●XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)Options change depending on signals●Clock Set to the minimum level if noise occursH-posAdjusts horizontal positionV-posAdjusts vertical positionClock Phase Eliminates flicker and distortionAdjust after Clock adjustment● Set to the minimum level if noise occurs●SyncChooses another synchronous signal if the image is distorted (H & V / On Green)H & V : by the horizontal and vertical signals from your PC●On Green : by the green signal from your PC (if available)Reset toDefaults Press the OK button to reset to the default PC Setup settingsOther items● p. 26 - 31NoteFor HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2) by using HDMI cable (p. 63).●