Panasonic Viera TH-37PD60B Operating Instructions Manual

Also see for Viera TH-37PD60B: Service manual

Contents

AdvancedControl with HDMISetup menuAV2Q-LinkOffOnAV2 out MonitorTVPower on preferenceDVB Setup MenuOwner IDShipping conditionOff timerPower save OffSide panel OffIDTVMENUOKMENUOKOKOKOK38 39Select "On"(default is On)Select "Setup menu"Select "Control with HDMI"213Display the menu∗Enjoy additional HDMI Inter-Operability with Panasonic products which have "HDAVI Control" function.HDMI connections to some Panasonic equipment (Panasonic DVD Recorder DIGA, Panasonic Playertheatre, Panasonic Amplifier, etc.) allow you to enjoy easy playback or home theatre.About connections, see "External Equipment" (p. 40). Read the manuals of the equipment too.This function needs an HDMI compliant (fully wired) cable.Non-HDMI-compliant cables cannot be utilized.Consult your local Panasonic dealer or refer to the URL for applicable equipment: www.panasonic.co.ukControl with HDMI " Control"∗Preparations(For the first time / When adding new equipment, reconnecting equipment or changing setup)After connection turn the equipment on and then switch the TV unit on.Select the input mode to HDMI (p. 17), and make sure that an image isdisplayed correctly.4Main menuPicture menuSound menuSetup menuHome theatreHDMI Functions (Continued)■ To return to TVEXITEasyplaybackAutomatic Input switching-When the connected Panasonic equipment is operated,input mode is switched automatically. When it is stopped operating, input mode isreturned.Power onlinkWhen the connected Panasonic equipment starts playback or direct navigator orfunction menu are activated, the TV is automatically turned on. (Only when TV is inStandby mode.)Power offlink When TV is set to Standby mode, the connected Panasonic equipment is alsoautomatically set to Standby.TheatrespeakerYou can control the theatre speaker with TV’s remote control.This function is available when Panasonic Amplifier or Player theatre is connected.Display the menu MENUSelect "Home theatre" or "TV speaker"■ Home theatre:Adjustment for equipment(automatically turned on if it is inStandby mode)• When selecting "Home theatre", the sound of TV speakers is mute.• When the equipment is turned off, TV speakers will be active.Volume up / downMute■ TV speaker:TV speakers are active.Main menuPicture menuSound menuSetup menuHome theatre• HDMI Functions• Setup the equipment to enable this function. Read the manual of the equipment.• This function may not work normally depending on the equipment condition.• This function may not work normally when Panasonic Player theatre is connected.• The equipment can be operated by TV’s remote control with this function on even if TV is in Standby mode.• Image or sound may not be available for the first few seconds when the playback starts.• Image or sound may not be available for the first few seconds when Input mode is switched.• Volume function will be displayed when adjusting the volume of the equipment.• Easy playback is also available by using the remote control for Amplifier. Read the manuals of Amplifier.Noteaccessselectselectselectaccessselect• Displayed when Amplifier or Player theatre is connected.This may be displayed after disconnecting the equipment.In this case, set "Control with HDMI" in Setup menu to"Off", then set to "On" again.• It is recommended that you use Panasonic’s HDMI cable.Recommended part number:RP-CDHG15 (1.5 m)RP-CDHG30 (3.0 m)RP-CDHG50 (5.0 m)