Panasonic Viera TH-37PR10 Operating Instructions Manual

Also see for TH-42PR10U: Operating instructions Service manual Manual de instrucciones

18MENU ENTER/INPUT VOLASPECT ControlsThe Plasma Display will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture.Press repeatedly to move through the aspect options:Mode Picture ExplanationNORMALNORMAL34 NORMAL will display a 4:3 picture at its standard 4:3 size.ZOOMZOOM43169ZOOM mode magnifies the central section of the picture.FULLFULL43169FULL will display the picture at its maximum size but with slightelongation.JUST43 916JUSTJUST mode will display a 4:3 picture at its maximum size but with aspectcorrection applied to the center of the screen so that elongation is onlyapparent at the left and right edges of the screen. The size of the picturewill depend on the original signal.PanasonicAUTOPanasonic AUTO4 163 9The display will automatically become enlarged (depending on thepicture source), allowing you to view the picture at its maximum size.Notes:• Panasonic AUTO mode is designed to automatically adjust the aspectratio to handle a mix of 16:9 and 4:3 program material. Certain 4:3program material, such as stock market data screens, may occasionallycause the image size to change unexpectedly. When viewing suchprograms, it is recommended that the ASPECT be set to NORMAL.• If adjusting the PICTURE V-POS/V-SIZE in Panasonic AUTO with FULLmode, the adjustment is not memorized. When exiting the mode, thescreen will return to a former adjustment.• Panasonic AUTO can not be selected while BNC Dual Video TerminalBoard (TY-FB9BD) is installed.For an elongated image Image is expanded43Changes inaccordance with thePanasonic AUTOmode setting (seepage 33).For a 4:3 imageThe aspect mode changes each time the ENTER buttonis pressed.[During MULTI PIP Operations]• Picture and Picture, Picture in Picture :• Others : Aspect switching is not possible.[from the unit]NORMAL ZOOM FULLPanasonic AUTO JUSTNORMAL FULLNote:When selecting an input slot that attaches BNC Dual Video TerminalBoard (TY-FB9BD), Panasonic AUTO cannot be selected.Note: Do not allow the picture to be displayed in NORMAL mode for an extended period, as this can cause a permanentimage retention to remain on the Plasma Display Panel.Notes:• For PC signal input, the mode switches between “NORMAL”, “ZOOM” and “FULL” only.• For a 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p signal input, the mode isset to “FULL” mode, and switching is not possible.• Panasonic AUTO can be selected only during Video signal input.• The aspect mode is memorized separately for each input terminal.