Panasonic Viera TH-42PWD5 Operating Instructions Manual

33Setup of SCREENSAVER Time5SCREENSAVERPress to select START TIME/ FINISH TIME(When TIME OF DAY is selected).Press to select SHOW DURATION/ SAVERDURATION (When INTERVAL is selected).Press to select each time adjustment screen.START TIMESTART TIME 0:0000MINUTES ADJUSTMENT 00HOURS ADJUSTMENTFINISH TIMEFINISH TIME 0:00MINUTES ADJUSTMENTHOURS ADJUSTMENT 0000Press to select HOURS ADJUSTMENT/MINUTES ADJUSTMENT.Press to set up HOURS or MINUTES.PERIODIC TIMESHOW DURATION 0:00MINUTES ADJUSTMENTHOURS ADJUSTMENT 0000OPERATING TIMESAVER DURATION 0:00MINUTES ADJUSTMENTHOURS ADJUSTMENT 0000button: Forwardbutton: BackPress to store settings.Note : Timer function will not work unless “PRESENT TIME OF DAY” is set.60:000:00SCREENSAVERFUNCTIONMODEWHITE BAR SCROLLINTERVALSHOW DURATIONSIDE BAR ADJUST HIGHSAVER DURATIONSIDE BAR ADJUST2 Press to select theSIDE BAR ADJUST.Press to selectOFF, DARK, MID, BRIGHT.OFF DARK MID BRIGHTR0:000:00SCREENSAVERFUNCTIONMODEWHITE BAR SCROLLINTERVALSHOW DURATIONSIDE BAR ADJUST MIDSAVER DURATIONPress to exit from SCREENSAVER.31Do not display a picture in 4:3 mode for an extended period, asthis can cause an after-image to remain on the side bars oneither side of the display field.To prevent the appearance of such an after-image, change thebrightness of the side bars.To display the SCREENSAVER screen.(Refer to page 32, operation guide steps 1 and 2)Notes:• Setting the side bar to bright mode for an extended period may result in occurence of after-images.• The side bar may flash (alternate black/white) depending on the picture being shown on the screen. In suchan occurrence, use the Cinema mode.SCREENSAVERFUNCTIONMODEWHITE BAR SCROLLTIME OF DAYSTART TIME 0:000:00SIDE BAR ADJUST MIDFINISH TIMEside bars4:3Screen Displayafter-images