Panasonic Viera TH-50PX8E Operating Instructions Manual

Also see for TH-37PX8E: Operating instructions

Advanced31• Tuning ProgrammesAny new services found will be added to the DVB Service List.Add New DVB ServicesChannel Service Name Type QualityFree TV: - Pay TV: - Radio: - Data: -SearchingAnalogue Scan 21 68Scan 5 69This will take about 3 minutes. • The new service is added with the current settingssaved as they are.Add DVBprogrammeautomaticallyAdd NewDVB ServicesNew DVB service found!Press OK to add new service.Press EXIT to lgnore.Selects whether to give a notifi cation message when a new DVB service is found. (Off / On)Display anotifi cationmessageNew ServiceMessageAuto Setup - DigitalThis will take about 3 minutes.Scan 5 6962Channel Service Name Type QualityCBBC Channel Free TV 1062 BBC Radio Wales Free TV 1062 E4 Free TV 1062 Cartoon Nwk Free TV 10Free TV: 4 Pay TV: - Radio: - Data: -SearchingEXITRETURNStart Auto SetupAll Digital tuning data will be erasedAuto SetupStart Auto Setup Settings are made automatically• All the previous tuning settings are erased.• The programme, language, country / region settings are downloaded to a Q-Link orVIERA Link compatible equipment connected to the TV.• When the operation is completed, the programme at programme position “1” will be displayed.• If tuning has not been done completely “DVB Manual Tuning”, “Analogue Manual Tuning”Automatically retune all DVB or Analogue programmes received in the area.• Only DVB programmes are retuned in DVB mode.• Only Analogue programmes are retuned in Analogue mode.• If a Child Lock PIN number (p. 32) has been set, it must be entered.Set all DVBor AnalogueprogrammesautomaticallyAuto SetupDVB Signal ConditionDVB Programme [CH70] CBBC ChannelSignal QualitySignal Strength0 100 10Selects a programme and checks the DVB signal condition.• To change the programmeA good Signal Strength is not an indication ofsuitable signal for DVB reception. Please usethe Signal Quality indicator as follows:Signal Quality:• Green bar Good• Yellow bar Poor• Red bar Bad (Check the aerial)CheckDVB signalDVB SignalConditionSet DVBprogrammemanuallyDVB ManualTuningNormally use “Auto Setup” or “Add New DVB Services” to add DVB programmes to yourservice list.If tuning has not been done completely or for adjusting the direction of the aerial, use this function.select channelsearchDVB Manual TuningAnalogue Scan 21 68FrequencyProg. Service Name Type NewFree TV: - Pay TV: - Radio: - Data: -StoppedSignal Strength 0 10Signal Quality 0 10MHz474,00[CH21]• All services found will be added to theDVB Service List.adjust frequency (set where the level of“Signal Quality” becomes the maximum)Set AnalogueprogrammemanuallyAnalogueManual Tuning1 BBC1CH33Analogue Manual TuningSound SystemManual Tuning 2 78 411Fine TuningSC1Colour System AutoCH33ŶFine TuningUse to make small adjustments to the tuning of an individual programme (affected byweather conditions, etc.)ŶManual TuningSet Analogue programme manually after Auto Setup.• Set Sound System and Colour System, and then perform this function.Normally set Colour System “Auto”.• If a VCR is connected only with the RF cable, select programme position “0”.SC1: PAL B, G, H / SECAM B, GSC2: PAL ISC3: PAL D, K / SECAM D, KF: SECAM L / L’storesearchSearch and storeSelect the programmeSelect the programme positionVCR1 324 657 980