Panasonic Viera TH-L32E5A Operating Instructions Manual

Also see for Viera TH-L42E5A: Service manual

Auto Tuning175 [WPS(Push button)]1. Press the WPS button on the access point until the light flashes2. Connect the TV with the access point1) Please press the 'WPS' button on the wirelessaccess point until its light flashes.2) When the light is flashing select ‘Connect’ onTV.If you are unsure, please check the instructionmanual of the wireless access point.WPS(Push button)Connect● Ensure that your access point supports WPS for this setup.● WPS: Wi-Fi Protected Setup™● If the connection has failed, check the settings and positions ofyour access point. And then, follow the on-screen instructions.3. After the access point setting is finished, perform the connection testCheck wireless network connection.Check acquired IP address.Check for devices using same IP address.Check gateway connection.Check server connection.Connection Test : succeededThe test is successful and the TV is connected to thenetwork.: failedCheck the settings and connections. And then select[Retry].4. Go to the next step(Press twice)6 Select [Home]Select [Home] viewing environment to use in your home environment.Please select your viewing environment.Home Shop selectset■ [Shop] viewing environment (for shop display only)[Shop] viewing environment is the demonstration mode to explain main features of this TV.Select [Home] viewing environment to use in your home environment.● You can return to viewing environment selection screen at the stage of Shop confirmation screen.1 Return to viewing environmentselection screen2 Select [Home]Please select your viewing environment.Home Shop selectsetShopYou have selected shop modeTo change viewing environment later on, you will need to initialise all settings by accessing ShippingCondition. [Shipping Condition] (p. 43)Auto Tuning is now complete and your TV is ready for viewingIf tuning has failed, check the connection of the RF cable, and then, follow the on-screen instructions.Note● To check the channel list “Using TV Guide ” (p. 23)● To edit or hide (skip) channels “Tuning and Editing Channels” (p. 35 - 38)● To retune all channels [Auto Tuning] in “Tuning and Editing Channels” (p. 37, 38)● To add the available TV mode later [Add TV Signal] (p. 33)● To initialise all settings [Shipping Condition] (p. 43)