- 23 -Selecting channel1. Display TV Selection with TV.2. Select the mode with / and press OK to set.Freesat (UK only) / DVB / Analogue / Other Sat. (UK only) / Satellite(Ireland only)● Other Sat. is displayed if Auto Setup is completed for Other Sat.channels.Watching > Tuning and editing channels > Auto Setup● The selectable modes vary depending on the channels stored.● You can also select the mode pressing TV repeatedly.● If TV Selection is not displayed, press TV to switch the mode.3. Select a channel with Channel Up / Down or Numeric buttons.● Freesat channel position numbers are in the 100 - 999 and 0100 - 0999ranges. DVB and Other Sat. / Satellite channel position begin fromnumber 1 upward. Analogue channel position numbers are in the 0 - 99range.■ To select a channel using information banner1. Display information banner with if it is not displayed.2. Select a channel with / and press OK to watch while the banner isdisplayed.Watching > Basic > Information banner■ To select a channel using TV Guide1. Display TV Guide with GUIDE.2. Select the current programme with / / / and press OK toaccess.– The current programme is displayed on the top left of the screen.3. Select View with / and press OK to watch. (DVB)Watching > TV Guide > Using TV Guide
