Panasonic Viera TX-L24C5B Operating Instructions Manual

11AC Power Cord ConnectionThis LCD TV uses nominal input voltages of 220-240V AC.It is designed to work with single-phase power systems. Toreduce risk of electrical shock, do not plug into any other typeof power system. Consult your authorised dealer or servicestation if you are not sure the type of power being supplied.Connect the LCD TV with all peripheral equipment beforeturning the LCD TV on.Caution• For safety, unplug AC power cord when the LCD TV is notin use.Aerial or Cable ConnectionCable used for connection (This Outdoor Aerial cable is notsupplied with this LCD TV.)• Aerial CableAV INPC AUDIOvia AV 2>PC<Manufactured under licensefrom Dolby Laboratories.Dolby and the double-Dsymbol are trademarks ofDolby Laboratories.ST3ST3Note:• For all aerial circuit problems, please consult your localdealer.Remote Control Batteries Installation1. Remove the battery compartment cover.2. Insert two size R03  AAA batteries (1.5V) according to “+”and “-” polarity markings inside the battery compartment.3. Close the battery compartment cover.CautionTo insure safe operation, please observe the followingprecautions:• Replace two batteries at the same time.• Do not use a new battery with a used battery.• Avoid contacting with water or liquid.• Do not expose the Remote Control or Batteries to moisture,or heat such as sunshine, fire or the like.• Do not drop the Remote Control.• If a battery has leaked on the Remote Control, carefully wipecase clean and install new batteries.• Risk of explosion if battery is replaced by an incorrect type.• Dispose of used batteries according to the instructions.• Remote control contains R03  AAA battery and must bekept out of reach of small children to avoid accidentalingestion.• Replace only with same or equivalent type. Do not mixdifferent battery types (such as alkaline and manganesebatteries).• Do not use rechargeable (Ni-Cd) batteries.