Panasonic Viera TX-L24C5B Operating Instructions Manual

9PART NAMES AND FUNCTIONSTV Controls/ Indicators345671 21 Remote Control Signal Receiver• Do not place any objects between the TV remotecontrol signal receiver and remote control.2 Power IndicatorRed: StandbyGreen: OnGreen blink: Receiving a command from theremote control.3 VOL +/-• Used to change volume.• Used to adjust the value of the selected item onOn-Screen Menu.4 CH /• Used to change channels.• Used to select item on On-Screen Menu.5 MENU• Open or close the On-Screen Menu.6 INPUT/OK• Use to select an input source.• Confirm and enter a selection.7 (POWER)• Use to turn the TV On or Off.TV (Side / Back)AV INPC AUDIOvia AV 2>PC<Manufactured under licensefrom Dolby Laboratories.Dolby and the double-Dsymbol are trademarks ofDolby Laboratories.ST3ST3>PC<7981 2 5 634101 HDMI 1/HDMI 2• Connect all kinds of HDMI output equipment.• When connecting a DVI device using an HDMI-DVIadapter, connect the device to the HDMI1 jack.2 AV 2• Connect video and audio output from videoequipment.3 DIGITAL AUDIO OUT• Connect an audio amplifier to this jack.4 PC• Connect computer outputs to this terminal.• Connect an audio cable to L/R jacks of AV2 and audioout jack on the computer.5 AV 1• Full SCART, which transmits RGB, S-Video and CVBSin, and audio/video out (Analogue only).6 Aerial Jack• Connects to TV RF signals (antenna/CATV).7 Common Interface• The Common Interface Module menu providesaccess to software contained on Common Interface(CI) Modules.8 ETHERNET• This terminal is for access to the MHEG interactiveservices and features through an internet.• Please contact broadcasters for availability ofservices.9 Headphone• Connect a headphone (stereo) to this jack and the TVspeaker out will be muted.10 USB• Connect USB memory stick to this terminal to playMultimedia.