19TimerOff TimerAuto StandbyOffSelectAccess EXITRETURN4 hoursMain Menu1. Press MENU button and ab buttons to select “Timer”, theTimer menu will be displayed.2. Press OK button to enter Timer menu.3. Press ab buttons to select item desired.4. Press cd buttons to adjust value.5. Press BACK/RETURN button to return the previousmenu.6. Press EXIT button to exit menu operation.Off Timer• Sets the time until the TV automatically goes to Standbymode.Auto Standby• Makes non-watched or non-used connected equipment gointo Standby mode to reduce the power consumption.SetupTuning MenuLanguageDisplay SettingsCommon InterfaceHDMI ControlSystem MenuChild LockOther SettingsSelectAccess EXITRETURNMain MenuOn1. Press MENU button and ab buttons to select “Setup”, theSetup menu will be displayed.2. Press OK button to enter Setup menu.3. Press ab buttons to select item desired.4. Press cd buttons to adjust value.5. Press BACK/RETURN button to return the previousmenu.6. Press EXIT button to exit menu operation.PC Setup• For PC input source only.Input Resolution• Options change depending on signals.Clock• Sets to the minimum level if noise occurs.H-pos• Adjusts horizontal position.V-pos• Adjusts vertical position.Clock Phase• Eliminates flicker and distortion.Auto Adjustment• Automatically adjusts the image settings such as positionand phase.Tuning MenuTuner Mode• Selects Aerial or Cable.Operator• Depends on the countries.Auto Setup• Automatically sets the channels.Update Channel List• Updates channel list without erasing the originalinformation.• Only available when Tuner Mode is set to Aerial.Single RF Scan• Scans single RF channels and checks the signal condition.