Panasonic Viera TX-L32DT35E Operating Instructions Manual

Also see for TX-L32DT35E: Operating instructions

Contents

Viewing 3D images33Item Adjustments / Configurations (alternatives)2D 3D Depth Selects a level of 3D-image depth for viewing converted 2D images [Min] / [Mid] / [Max]3D AdjustmentAdjustment of the 3D effect (except in [2D 3D] mode) [Off] / [On]• Set to [On] to enable [Effect] setting.• When setting to [On], a safety precaution message will appear. Read it carefully and then press theBACK/RETURN button to go to [Effect] setting.[Effect] : Adjust the 3D depth according to the contents or to your preference.Picture Sequence Select [Reverse] if you feel that the sense of depth is unusual (except in [2D 3D] mode)[Normal] / [Reverse]Edge Smoother Set to [On] if you feel the contoured parts of an image are not smooth enough (except in [2D 3D]mode) [Off] / [On]3D DetectionAutomatically detects the 3D format signals [Off] / [On] / [On (Advance)][On (Advance)] : Detects the 3D format signals and displays the 3D image automatically.[On] : Detects the particular 3D format signals (Frame Sequential, etc.) and displays the 3D imageautomatically.• To view 3D images without any notifications and operations, set to [On (Advance)].3D SignalMessageSelects whether to give a notification message when a signal of 3D format is found [Off] / [On]• For DVB, Component and HDMI• This function is not available when [3D Detection] is set to [On (Advance)].SafetyPrecautions Displays the precautions for viewing 3D imagesNote• [3D Adjustment] and [Picture Sequence] will not be memorized when changing the input mode or channel.Available range for the 3D EyewearIf the 3D Eyewear is placed outside the coverage area for about 5 minutes, the 3D Eyewear will be turned off automatically.: Coverage area for using the 3D Eyewear35°35°View from the topApprox.3.2 mApprox.3.2 m Approx.3.2 mView from the side20°20°Approx. 3.2 mNote• You cannot view the 3D images with the 3D Eyewear too far from the TV, because of the difficulty of receiving infrared signalsfrom the TV.• The range may be shortened depending on the obstacles between the infrared sensors on the TV and the 3D Eyewear, thedirt on the infrared sensors or the surrounding environment.• If you do not look toward the TV screen for a while when viewing 3D images, the 3D Eyewear may be turned off automaticallyeven if in the coverage area.