Panasonic Viera TX-L32E30E Operating Instructions Manual

Also see for Viera TX-L42E30E: Service manual

Contents

Auto SetupQuick Start Guide146 ■ [Wireless]Select the connection typeConnection TypePlease select network connection type.Search for access pointWPS(Push button)accessselect[Search for access point]Access points found automatically are listed.1. Select your desired access point123Access Point ASSIDAccess Point BAccess Point C11n(2.4GHz)11n(5GHz)11n(5GHz)Available Access PointsNo. Wireless type Encrypt Receptionaccessselect: Encrypted access point• To search access points again(yellow)• For the information of thehighlighted access point • To set manually (p. 75)(red)2. Access the encryption key input modeEncryption Key SettingConnection will be made with the following settings:-SSID : Access Point AAuthentication type : WPA-PSKEncryption type : TKIPPlease input the encryption key.Encryption key• If the selected access point is not encrypted, the confirmation screenwill be displayed. It is recommended to select the encrypted accesspoint.3. Enter the encryption key of the access pointA B C D E F G H I J K L M N O P Q R S TU V W X Y Z 0 1 2 3 4 5 6 7 8 9 ! : #a b c d e f g h i j k l m n o p q r s tu v w x y z ( ) + - . * _Access Point SettingsEncryption keySet characters StoreBACK/RETURNselectset• You can set characters by using numeric buttons.4. Select [Yes]NoAccess Point SettingsEncryption key is set to:-XXXXXXXXSelect 'Yes' to confirm.Select 'No' to change.Yessetselect• To re-enter the encryption key, select [No].• If the connection has failed, check the encryption key, settingsand positions of your access point. And then, follow the on screeninstructions.5. After the access point setting is finished, perform the connection testCheck access point connection.Check acquired IP address.Check for devices using same IP address.Check gateway connection.Check server connection.Connection Test : succeededThe test is successful and the TV is connected to thenetwork.: failedCheck the settings and connections, and then select[Retry].• To set manually, select [Manual] and set each item. Fordetails (p. 72)6. Go to the next step 7(Press twice)