Panasonic Viera TX-L32E31B Operating Instructions Manual

Contents

Auto Setup143 5. After the access point setting is finished, perform the connection testCheck access point connection.Check acquired IP address.Check for devices using same IP address.Check gateway connection.Check server connection for VIERA Connect.Connection Test : succeededThe test is successful and the TV is connected to thenetwork.: failedCheck the settings and connections, and then select[Retry].• To set manually, select [Manual] and set each item. Fordetails (p. 73)6. Go to the next step 4(Press twice)[WPS(Push button)]1. Press the WPS button on the access point until the light flashes2. Connect the Wireless LAN Adaptor and the access point1) Please press the ‘WPS’ button on the accesspoint until its light flashes.2) When the light is flashing select ‘Connect’ onTV.If you are unsure, please check the instructionmanual of the access point.WPS(Push button)Connect• Ensure that your access point supports WPS for this setup.• WPS : Wi-Fi Protected Setup™• If the connection has failed, check the settings and positions of youraccess point. And then, follow the on screen instructions.3. After the access point setting is finished, perform the connection testCheck access point connection.Check acquired IP address.Check for devices using same IP address.Check gateway connection.Check server connection for VIERA Connect.Connection Test : succeededThe test is successful and the TV is connected to thenetwork.: failed4. Go to the next step 4 Check the settings and connections, and then select[Retry].• To set manually, select [Manual] and set each item. Fordetails (p. 73)(Press twice)4 Input Owner ID* * * *Please enter new PINPINOwner ID Please enter your own choice of PIN number, name, etc. to help the policeto crack crime.• Make a note of the PIN number in case you forget it. The PIN number cannot be reset.• You can input or change the Owner ID later. [Owner ID] (p. 50)• To skip this stepEXIT• This step will be skipped in the Auto Setup after [Shipping Condition] (p. 49) is performed.■ How to input Owner ID1 Enter the PIN number (4 digits)* * * *Please enter new PINPINOwner ID abc defjklghi mnotuvpqrs wxyz• Enter the PIN number twice at first setting.2 Select the item (NAME / HOUSE NO / POSTCODE)* * * *PINNAMEHOUSE NOPOSTCODEOwner ID-Data EntryaccessselectQuick Start Guide