Panasonic Viera TX-L32E31B Operating Instructions Manual

Contents

How to Use Menu Functions32Menu Item Adjustments / Configurations (alternatives)PictureAdvanced SettingsIntelligent FrameCreationAutomatically compensates the picture frame rate and removes juddering movementsto make the images smooth [Off] / [Mid] / [Max]• Depending on the contents, images may be noisy. To prevent the noise, change thesetting.• This function is not available for selection (default to [Off ]) when [Viewing Mode] isset to [Game] or in the mode of PC input / network service operations.24p Smooth FilmAutomatically compensates the picture frame rate to make the 24p source movieimages smooth [Off] / [Mid] / [Max]• This is available only for 24p signal input and displayed instead of [Intelligent FrameCreation].• This function is not available for selection (default to [Off ]) when [Viewing Mode] isset to [Game] or in the mode of PC input / network service operations.Clear CinemaImproves vertical resolution for movie images [Off] / [On]• This function is available for the interlaced signal (except when [Viewing Mode] is setto [Game]).Resolution EnhancerEnhances the picture resolution to make the image sharper [Off] / [Mid] / [Max]• This function is available for SD (Standard definition) signal.• As for HD (High definition) signal, this function is available when aspect mode is set to[16:9] ([16:9 Overscan] is set to [On]), [4:3 Full] or [Zoom].• Not valid on Media Player and network service operations16:9 OverscanSelects the screen area displaying the image [Off] / [On][On] : Enlarges the image to hide the edge of the image.[Off] : Displays the image in the original size.• Set to [On] if noise is generated on the edge of the screen.• This function is available when aspect is set to [Auto] (16:9 signal only) or [16:9].• This function can be memorized separately for SD (Standard definition) and HD (Highdefinition) signals.• Not valid on PC and VIERA ConnectDVI Input SettingChanges the black level in the image for HDMI input mode with DVI input signal manually[Normal] / [Full]• When the DVI input signal from the external equipment, especially from PC, isdisplayed, the black level may not be suitable. In this case, select [Full].• The black level for HDMI input signal will be adjusted automatically.• For HDMI input mode with DVI input signal onlyReset to Defaults Press the OK button to reset the present Picture Viewing Mode to the default settingsSoundModeSelects the basic sound mode [Music] / [Speech] / [User]• The selected mode affects all input signals.[Music] : Improves sound quality for watching music videos, etc.[Speech] : Improves sound quality for watching news, drama, etc.• In Music and Speech modes, you can adjust [Bass] and [Treble] settings, and thosesettings will be stored for each mode.[User] : Adjusts the sounds manually by using the equaliser to suit your favourite soundquality.• For the User mode, [Equaliser] will appear on the Sound Menu instead of [Bass] and[Treble]. Select the [Equaliser] and adjust the frequency. [Equaliser] (see below)Bass Increases or decreases level to enhance or minimise lower, deeper sound outputTreble Increases or decreases level to enhance or minimise sharper, higher sound outputEqualiserAdjusts the frequency level to suit your favourite sound quality• This function is available when [Mode] is set to [User].• Select the frequency and change the frequency level by using the cursor button.• If you want to enhance the bass sound, raise the level of the lower frequency. If youwant to enhance the treble sound, raise the level of the higher frequency.• To reset the levels of each frequency to the default settings, select the [Reset toDefaults] by using the cursor button, and then press the OK button.