Panasonic Viera TX-L32ET5B Operating Instructions Manual

Also see for Viera TX-L32ET5B: Service manual

Contents

Panasonic Viera TX-L32ET5B Operating Instructions Manual Manual pdf 52 page image

Timer Programming52Timer ProgrammingTimer Programming from MenuThe Timer Programming menu allows you to choose programmes that you want to remind watching or record to theexternal recorder. At the correct time, the TV will tune to the correct channel even if the TV is in Standby mode.TV Guide may also be used to set timer programming event (p. 25).● Timer Programming can store up to 15 events.● Timer Programming only works reliably if correct time information is received via the signal from the broadcaster orservice provider.● For recording using Timer Programming, the TV must be either on or in Standby. For reminders to be displayed, theTV must be on.● No other channel can be selected while the recording of Timer Programming is in progress.● Recording an encrypted (copy-protected) programme may not be possible.● When recording programmes to the external recorder, be sure to make the proper settings on the recorder connectedto the TV. If a recorder compatible with Q-Link, VIERA Link or similar technologies is connected to the TV (p. 80, 81)and [Link Settings] (p. 41) are completed, no setting of the recorder is required. Also read the manual of the recorder.● If the recorder is not compatible with Q-Link, VIERA Link or similar technologies, make timer programming of therecorder. For preparations of a recorder, read the manual of the recorder.● Recording to the external equipment via SCART is always in standard definition (composite video), even if theoriginal programme is in high definition.● 2 minutes before the starting time, a reminder message appears if you are watching TV.• To remove the message and start the programming • To cancel the programming1 Select the tuner you want to use (DVB or Analogue)(p. 20)2 Display the menu and select [Timer]Timerselectaccess3 Select [Timer Programming]AccessTimer ProgrammingOff TimerAuto StandbyOffOffselectaccessSet timer programming event details1 Start making the settings 2 Select the function ([Ext Rec.] or [Reminder])[Ext Rec.] :Records the programme to the external recorder.When the start time comes, the channel will be switched automatically and the video and audio signals will beoutput. 2 minutes before the starting time, a reminder message appears if you are watching TV.[Reminder] :Reminds you to watch the programme.When you are watching TV, a reminder message appears 2 minutes before the start time.Press the OK button to switch to the programmed channel.3 Set the channel, date and time (repeat the operations as below)Set items in the order of 1 to 4.select the itemset● 1, 3 and 4 can also be enteredwith numeric buttons.Store