Panasonic Viera TX-L32U10B Operating Instructions Manual

Also see for Viera TX-L32U10B: Service manual

Link Functions(Q-Link / VIERA Link) Advanced55VIERA Link “ Control™”Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function.This TV supports “HDAVI Control 4” function.Connections to the equipment (DIGA Recorder, HD Video Camera, Player theatre, Amplifier, etc.) withHDMI and SCART cables allow you to interface them automatically (p. 52 and p. 53).These features are limited to models incorporating “HDAVI Control” and “VIERA Link”.Some functions are not available depending on the equipment’s version of HDAVI Control. Please confirm the connected equipment’s version of HDAVI Control.VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard known as HDMI CEC (Consumer Electronics Control), is a unique function that we have developed and added.As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.Please refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function. About applicable Panasonic equipment, consult your local Panasonic dealer or refer to the URL: www.panasonic.co.ukPreparations Connect the equipment supporting VIERA Link. VIERA Link connection p. 52 and p. 53Use fully wired HDMI compliant cable. Non-HDMI-compliant cables cannot be utilized. Recommended Panasonic’s HDMI cable part number:RP-CDHG10 (1.0 m)•RP-CDHG15 (1.5 m)•RP-CDHG20 (2.0 m)•RP-CDHG30 (3.0 m)•RP-CDHG50 (5.0 m)•Use fully wired SCART cable. Set up the connected equipment. Read the manual of the equipment. For optimal recording, the settings of the recorder might be required. For details, read the manual of the recorder.Download Analogue channel setting “Analogue channel download” (see below)Set VIERA Link On in the Setup Menu “VIERA Link” (p. 32)Set up the TV After connection, turn the equipment on and then switch the TV on.Select the input mode to HDMI1 or HDMI2 (p. 24), and make sure that an image is displayed correctly.This setup should be done each time when the following conditions occur:for the first time•when adding or reconnecting equipment•when changing setup•Features availableAnalogue channel downloadAnalogue channel setting can be downloaded to the recorder with analogue tuner. Digital channelsetting is not downloaded.To download Analogue channel setting “Q-Link Download” (p. 32) or “Auto Setup” in Analogue mode (p. 35)or “Auto Setup” - when first using the TV (p. 12)Easy playbackAutomatic Input switching - When the connected equipment is operated, input mode is switchedautomatically. When it is stopped operating, input mode is returned.Power on linkWhen the connected equipment starts playback or direct navigator / function menu for the equipmentare activated, the TV is automatically turned on. (Only when the TV is in Standby mode.)Power off linkWhen the TV is set to Standby mode, the connected equipment is also automatically set to Standby.This function will work even if the TV enters standby mode automatically by Off Timer function or auto power standby function.