64Technical InformationInput signal that can be displayedCOMPONENT (Y, PB, PR ), HDMI Mark: Applicable input signalSignal name COMPONENT HDMI525 (480) / 60i 525 (480) / 60p 625 (576) / 50i 625 (576) / 50p 750 (720) / 60p 750 (720) / 50p 1,125 (1,080) / 60i 1,125 (1,080) / 50i 1,125 (1,080) / 60p 1,125 (1,080) / 50p 1,125 (1,080) / 24p PC (from HDMI terminal) Applicable input signal for PC is basically compatible to HDMI standard timing.Signal name Horizontal frequency (kHz) Vertical frequency (Hz)640 × 480 @60 Hz 31.47 60.00750 (720) / 60p 45.00 60.001,125 (1,080) / 60p 67.50 60.00NoteSignals other than above may not be displayed properly. The above signals are reformatted for optimal viewing on your display. P C signal is magnified or compressed for display, so that it may not be possible to show fine detail with sufficient clarity.First, remove the mains plug from the socket outlet.Display panel, Cabinet, PedestalRegular care:Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt or fingerprints.For stubborn dirt:Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergent to 100 parts water). Then wringthe cloth and wipe the surface. Finally, wipe away all the moisture.CautionDo not use a hard cloth or rub the surface too hard. This may cause scratches on the surface. T ake care not to subject the TV’s surfaces to water or detergent. A liquid inside the TV could lead to product failure.Take care not to subject the surfaces to insect repellent, solvent, thinner or other volatile substances. This may degrade surface quality or cause peeling of the paint.Take care not to tap or scratch the surface with your fingernail or other hard objects. Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time. This may degrade surface quality.Mains plugWipe the mains plug with a dry cloth at regular intervals. Moisture and dust may lead to fire or electrical shock.Maintenance