Panasonic Viera TX-P42G10B Operating Instructions Manual

Also see for VIERA TX-P42G10B: Brochure & specs Technical information

Contents

Panasonic Viera TX-P42G10B Operating Instructions Manual Manual pdf 31 page image

How to Use Menu Functions●(picture, sound quality, etc.)Viewing31Menu Item Adjustments / Configurations (alternatives)SoundModeSelect two different sound settings (Music / Speech)In each Sound Mode setting, Bass and Treble can be adjusted and stored to suit yourparticular sound requirementChanges to any settings in a mode will affect all signal sources●Sound quality can be improved●Bass Increases or decreases level to enhance or minimise lower, deeper sound outputTreble Increases or decreases level to enhance or minimise sharper, higher sound outputBalance Adjusts volume level of right and left speakersHeadphone Volume Adjusts the volume of the headphonesSurroundSurround sound settings (Off / V-Audio / V-Audio Surround)V-Audio: Provides a dynamic enhancer of width to simulate improved spatial effectsV-Audio Surround: Provides a dynamic enhancer of width and depth to simulateimproved spatial effectsSwitching is also possible by the Surround button on the remote control (p. 9).●Volume Correction Adjusts the volume of individual channel or input modeSpeaker Distance toWallAdjusts the low frequency sound (Over 30cm / Up to 30cm)If the back space between the TV and wall is over 30 cm, “Over 30cm” is●recommended.If the back space between the TV and wall is within 30 cm, “Up to 30cm” is●recommended.Preferred Multi Audio Selects the preferred language for digital channel multi audio (depending on thebroadcaster)NICAMNICAM (Near Instantaneous Companded Audio Multiplex)A format for digital sound over televisionReproduces stereo sound (Off / On)Off if reception is poor (FM monaural sound)●Analogue mode only●HDMI1 / 3 InputSelect to fit the input signal (Digital / Analogue) (p. 70)Digital : HDMI cable connectionAnalogue : HDMI-DVI adapter cable connectionHDMI input mode only●HDMI2 terminal is for digital signal only●No setting for HDMI2 available●Audio Description MenuAudio DescriptionUseful for visually-impaired viewers (Off / Auto)Set to “Auto” to activate the description sound track if availablefreesat or DVB mode only●The availability of audio description sound track is indicated by “AD” in the information●banner (p. 16).Volume Adjusts the volume for Audio DescriptionDVB mode only●Speakers Set to “On” to activate the description sound track from TV speakers (Off / On)DVB mode only●Headphones Set to “On” to activate the description sound track from headphones (Off / On)DVB mode only●Reset to Defaults Press the OK button to reset the present Sound Mode to the default settingsEffective to Bass, Treble, Balance, Headphone Volume and Surround●A different menu will be displayed while PC or SD Card is used. (p. 55 - 57)● Only available items can be selected.●