Panasonic Viera TX-P42ST30B Operating Instructions Manual

Contents

How to Use Menu Functions37Menu Item Adjustments / Configurations (alternatives)PictureAdvanced SettingsIntelligent FrameCreationAutomatically compensates the picture frame rate and removesjuddering movements to make the images smooth [Off] / [Mid] / [Max]• Depending on the contents, images may be noisy. To prevent thenoise, change the setting.• This function is not available for selection (default to [Off]) when [ViewingMode] is set to [Game] or in the mode of VIERA Connect.24p Smooth FilmAutomatically compensates the picture frame rate to make the 24psource movie images smooth [Off] / [Mid] / [Max]• This is available only for 24p signal input and displayed instead of[Intelligent Frame Creation].• This function is not available for selection (default to [Off]) when [ViewingMode] is set to [Game] or in the mode of VIERA Connect.Clear CinemaImproves vertical resolution for movie images [Off] / [On]• This function is available for the interlaced signal (except when[Viewing Mode] is set to [Game]).3D Refresh RateReduces juddering and flicker noises of the 3D images [Auto] / [100Hz]• If the room is lit by fluorescent lights / dimmers (50 Hz) and lightappears to flicker when using the 3D Eyewear, set to [100Hz].ResolutionEnhancerEnhances the picture resolution to make the image sharper [Off] / [Mid] / [Max]• This function is available for SD (Standard definition) signal.• As for HD (High definition) signal, this function is available when aspectmode is set to [16:9] ([16:9 Overscan] is set to [On]) or [Zoom].• Not valid on Media Player and VIERA ConnectSide Panel Increases the brightness of the side panel [Off] / [Low] / [Mid] / [High]• The recommended setting is [High] to prevent panel “image retention”.16:9 OverscanSelects the screen area displaying the image [Off] / [On][On] : Enlarges the image to hide the edge of the image.[Off] : Displays the image in the original size.• Set to [On] if noise is generated on the edge of the screen.• This function is available when aspect is set to [Auto] (16:9 signal only) or [16:9].• This function can be memorized separately for SD (Standarddefinition) and HD (High definition) signals.• Not valid on VIERA ConnectDVI Input SettingChanges the black level in the image for HDMI input mode with DVIinput signal manually [Normal] / [Full]• When the DVI input signal from the external equipment, especially from PC,is displayed, the black level may not be suitable. In this case, select [Full].• The black level for HDMI input signal will be adjusted automatically.• For HDMI input mode with DVI input signal onlyPixel OrbiterSelects the mode for wobbling of the image to prevent panel “imageretention” [Auto] / [On][Auto] : Automatically works only for the appropriate images and yourarely recognise the wobbling.Scrolling BarScrolls the vertical bar to prevent panel “image retention”• Press the OK button to start scrolling and press any buttons (exceptStandby) to exit this mode.Reset to Defaults Press the OK button to reset the present Picture Viewing Mode to the default settingsSoundModeSelects the basic sound mode [Music] / [Speech] / [User]• The selected mode affects all input signals.[Music] : Improves sound quality for watching music videos, etc.[Speech] : Improves sound quality for watching news, drama, etc.• In Music and Speech modes, you can adjust [Bass] and [Treble]settings, and those settings will be stored for each mode.[User] : Adjusts the sounds manually by using the equaliser to suit yourfavourite sound quality.• For the User mode, [Equaliser] will appear on the Sound Menu insteadof [Bass] and [Treble]. Select the [Equaliser] and adjust the frequency.[Equaliser] (p. 38)Bass Increases or decreases level to enhance or minimise lower, deeper sound outputTreble Increases or decreases level to enhance or minimise sharper, higher sound output