Panasonic Viera TX-P42ST30B Operating Instructions Manual

Contents

On screen messages9898Message Meaning / ActionReset to Factory ShippingCondition Completed.Please switch off TV.• [Auto Setup] will automatically start when Mains power On / Offswitch is next turned On. (p. 13)Sending Preset Data • Q-Link or VIERA Link channel download is in progress.Software successfully updated.Press EXIT to continue. • The software updating is finished.Software update failed.Please try again later.Press EXIT to continue.• Perform [System Update Search Now] in System Update (p. 58).If this is still unsuccessful, there may not be any new softwareavailable.The device is not directlyconnected to the TV.The device may not workcorrectly.• Please do not connect the device via a USB HUB.This timer will not followthe TV Guide information.Press OK to continue,RETURN to restore originaltimer.• If you edit the start time or end time of Guide link programming bymore than 10 minutes, it will no longer be performed as Guide linkprogramming. The programming will be performed according to thetime setting.Timer already expired ! • The starting time in Timer Programming has already passed. Setthe timer correctly (p. 52).Timer incorrect ! • Set the start and end times in Timer Programming correctly (p. 52).Timer overlap.Press OK to keep,RETURN to edit.• Timer programming events are overlapped. Press the OK buttonto keep the overlapped setting. [Ext Rec.] are given priority over[Reminder]. When two or more [Ext Rec.] overlap, the first timerprogramming event starts and finishes as programmed. The nexttimer programming event can then start.Tuner LockedPress EXIT to unlock andstop recording• If you want to unlock the tuner, cancel Direct TV Recording(p. 78, 80) or the recording of Timer Programming (p. 52).Unable to download,please check equipment • The tape or disc is active. Stop the equipment and try again.3D image not available. • You may use a function not available for 3D effect. Exit the functionto view the 3D images.■ Media PlayerMessage Meaning / ActionCannot read file • The file is broken or unreadable.Check applicable data format. (p. 88, 89)No Device Inserted • Confirm the SD Card or USB device is inserted correctly.No valid file to play • The card has no data.This operation is not possible • The selected operation is not available.■ NetworkMessage Meaning / ActionThe software update is notcompleted. • Network download failed.Check the connections and settings. (p. 69 - 74)Ethernet cable notconnected• Check the connection of the LAN cable. If you use a hub, also checkthe light on the hub is lit.• The LAN cable might be defective.