Panasonic Viera TX-P42U10B Operating Instructions Manual

Also see for Viera TX-P42U10B: Technical information

68Message Meaning / ActionAll tuning data will be erased “Shipping Condition” will erase all tuning data (p. 42).●Are you sure ? Confirm correct operation.●Are you sure you want to delete this timer ?Press OK to delete timerPress RETURN to returnConfirm correct operation.●Bad signalThe signal is weak. Check the aerial is plugged in properly. It may●be necessary to have an aerial installer check the signal and aerialalignment.Reset channels. (p. 34 and p. 35)●Child Lock is active !Press OK to enter PIN.The selected channel is locked in Child Lock (p. 40). You must enter the●PIN number before the channel will be displayed.Feature not availableIt is not possible to record from COMPONENT, HDMI or PC. Connect the●recorder to the TV using a fully wired SCART cable for recording from theTV tuner.Confirm Q-Link or VIERA Link settings (p. 52 - 55).●Found new software version ∗∗∗.Press OK to start update(may take 40 mins)or Press EXIT to ignoreand you can update when TV is instandby.There is a new software available.●Invalid operation - Please check settingsand connections. Check the Q-Link or VIERA Link connection and setting (p. 52 - 55).●Invalid system time. Please exit ! Cannot get the time information. Check the connection of the RF cable.●Max. number of Timers already set ! The maximum number of timer programming events is 15.●New channels found!Press OK to update channel listPress EXIT to ignore.There may be new channels available.●This message will appear each time a change is made by the●broadcasters. This message can be deactivated by setting “New ChannelMessage” to Off in “DVB Tuning Menu”.Selecting OK will perform “Update Channel List”.No channel found.Please check aerial or local signalavailability.Press OK to start Auto Setup.Please follow the message.●If it is still failed, consult your local Panasonic dealer.No module inserted Check the CI module inserted completely (p. 45).●No recording - Check media The tape or disc may be “write protected”, missing or damaged.●No recording - Already recording The equipment may already be recording.●No recording - Unknown reason The recording may not be performed. Check the equipment.●Disc or tape may be full.●No service The broadcaster has stopped the service. Check the channel in TV●Guide. (p. 18)No signal The TV cannot detect the signal. Check the connection of the RF cable.●PIN incorrect! The PIN number you entered is wrong.●Please check settings and connectionson HDMI devices. Communication error in VIERA Link function (p. 55).●Please wait. A function is in progress.●On screen messages