Panasonic Viera TX-P42UT30B Operating Instructions Manual

Also see for Viera TX-P42UT30B: Service manual

Contents

Watching TV21AspectChange the aspect ratio (image size)ASPECT Enjoy viewing the image at its optimum size and aspect.Programmes usually contain an “Aspect Control Signal” (Widescreen signal, etc.), and the TVwill choose the aspect ratio automatically according to the “Aspect Control Signal” (p. 88).■ If you would like to change the aspect ratio manually1 Display Aspect Selection list 2 While the list is displayed,select the modeASPECT Aspect SelectionAuto16:914:94:3Zoom1Zoom2Zoom3SelectEXITRETURNChangeAspect Selection liststoreselect • You can also change the modeonly using the ASPECT button.ASPECT (Press repeatedly untilyou reach the desiredmode)[Auto]The best ratio is chosen and the image expanded to fill the screen.For details (p. 88)[16:9] [Zoom1]Directly displays the image at 16:9without distortion (anamorphic).Displays a 16:9 letterbox or 4:3image without distortion.[14:9] [Zoom2]Displays the image at thestandard 14:9 without distortion.Displays a 16:9 letterbox(anamorphic) image full-screenwithout distortion.[4:3] [Zoom3]Displays the image at thestandard 4:3 without distortion.Displays a 2.35:1 letterbox(anamorphic) image full-screenwithout distortion.At 16:9, displays the imageat its maximum (with slightenlargement).Note• Aspect is fixed to [16:9] when [Viewing Mode] is set to [Game] in the Picture Menu.• Aspect cannot be changed in teletext service and 3D mode (except for [2D 3D] mode in [3D ModeSelection] (p. 32)).• Aspect mode can be memorized separately for SD (Standard definition) and HD (High definition)signals.Display subtitles• Subtitles may not be displayed properly in 3D images.■ DVB modeDisplay / hide subtitles (if available)STTL • To change the language for DVB (if available)[Preferred Subtitles] (p. 40)■ Analogue modeDisplay subtitles Hide subtitlesSTTL EXITNote• This is the same as switching to Analogue teletext service and selecting “P888” (subtitle service). (p. 26)• You cannot change the channel when this function is active.