Panasonic Viera TX-P42UT30B Operating Instructions Manual

Also see for Viera TX-P42UT30B: Service manual

Contents

Using Network Services74■ [WPS(Push button)]1) Please press the ‘WPS’ button on the accesspoint until its light flashes.2) When the light is flashing select ‘Connect’ onTV.If you are unsure, please check the instructionmanual of the access point.WPS(Push button)Connectpress the WPS button on the access point until the light flashesconnect the Wireless LAN Adaptor and the access point• Ensure that your access point supports WPS for this setup.• WPS : Wi-Fi Protected Setup™■ [WPS(PIN)]1 Select your desired access point123Access Point ASSIDAccess Point BAccess Point C11n(2.4GHz)11n(5GHz)11n(5GHz)Available Access PointsNo. Wireless type Encrypt Receptionaccessselect• Ensure that your access point supports WPS for this setup.• To search access points again(yellow)• For the information of thehighlighted access point • To set manually(red)2 Enter the PIN code to the access point, and then select [Connect]Please register the following PIN codes on theaccess point.PIN code : 12345678Select ‘Connect’ after entering and saving thesettings on the access point.WPS(PIN)Connect■ [Search for access point]Access points found automatically are listed.1 Select your desired access point123Access Point ASSIDAccess Point BAccess Point C11n(2.4GHz)11n(5GHz)11n(5GHz)Available Access PointsNo. Wireless type Encrypt Receptionaccessselect: Encrypted access point• To search access points again(yellow)• For the information of thehighlighted access point • To set manually(red)2 Access the encryption key input modeEncryption Key SettingEncryption keyConnection will be made with the following settings:-SSID : Access Point AAuthentication type : WPA-PSKEncryption type : TKIPPlease input the encryption key.• If the selected access point is not encrypted, the confirmationscreen will be displayed. It is recommended to select theencrypted access point.