Panasonic Viera TX-P42XT50Y Operating Instructions Manual

Also see for Viera TX-P42XT50Y: Service manual Operating instructions

Technical Information95USB connection● When using USB cables, use the supplied Ferrite core (Middle size) for each cable to comply with the EMC standard.As for installing the Ferrite core, refer to the installing of the Ferrite core for headphones. (p. 88)● It is recommended to connect the USB Flash Memory or Communication Camera to the TV’s USB ports directly.● Some USB devices or USB HUB may not be used with this TV.● You cannot connect any devices by using USB card reader.● You cannot use two or more same kind of USB devices simultaneously except USB Flash Memory.● Additional information for USB devices may be on the following website. (English only)http://panasonic.jp/support/global/cs/tv/■ USB Keyboard● The USB Keyboard requiring its driver is not supported.● To change the language type [USB Keyboard Layout] (p. 45)● Characters may not be displayed correctly on the TV screen depending on the connected keyboard or the keyboardlayout setting.● Some of the keys of USB keyboards may correspond to the operation of the remote control.USB Keyboard Remote Control USB Keyboard Remote Control↑ / ↓ / ← / → Cursor buttons F2 VIERA TOOLSEnter OK F3 MENUBackspace BACK/RETURN F4 INPUT (AV)Esc EXIT F5 / F6 Channel Down / Up0 - 9 / Character Numeric buttons F7 / F8 Volume Down / UpF1 GUIDE F9 / F10 / F11 / F12 Coloured buttons■ Gamepad● Check the gamepads that have been tested for the performance with this TV at the following website. (English only)http://panasonic.jp/support/global/cs/tv/● Some of the keys of gamepads correspond to the operation of the remote control.Select Start101117 69 82345Example: Remote Control Remote Control1 Volume Up / Down 7 VIERA TOOLS2 Channel Up / Down 8 EXIT3 GUIDE 9 INPUT (AV)4 OK5 BACK/RETURN 10 MENU6 INTERNET 11 Cursor buttonsInput signal that can be displayed■ COMPONENT (Y, PB , PR ) (from AV2 terminal), HDMISignal name COMPONENT HDMI525 (480) / 60i, 60p625 (576) / 50i, 50p750 (720) / 60p, 50p1,125 (1,080) / 60i, 50i1,125 (1,080) / 60p, 50p, 24p: Applicable input signal■ PC (from HDMI terminal)Signal name Horizontal frequency (kHz) Vertical frequency (Hz)640 × 480 @60 Hz 31.47 60.001,280 × 720 @60 Hz 45.00 60.001,920 × 1,080 @60 Hz 67.50 60.00Applicable input signal for PC is basically compatible to HDMI standard timing.Note● Signals other than above may not be displayed properly.● The above signals are reformatted for optimal viewing on your display.● PC signal is magnified or compressed for display, so that it may not show fine detail with sufficient clarity.