Panasonic Viera TX-P46Z1E Operating Instructions Manual

Contents

74Link Functions (Q-LinkVIERA Link)Direct TV Recording - What you see is What you record Direct TV RecRecording the current programme in DIGA Recorder immediately.If you connect a variety of recorders including other manufacturers’ recorders at the same time, please●connect DIGA Recorder to the TV’s lower HDMI terminal number. For example, if you use HDMI1 and HDMI2for two recorders, in this case connect DIGA Recorder to HDMI1.If you cannot operate, check the settings and the equipment● “Summary of Q-Link and VIERA Link features” (p. 70 and p. 71), “Preparations” (p. 73)SCART connection is required to record the DVB-C programme.●Changing channel or turning off the TV is available while the recorder is recording from its own tuner.●Changing channel is not available while the recorder is recording from the TV tuner.●EXITDIRECT TV RECGUIDE1 Display “VIERA Link Menu”2 Select “Direct TV Rec” and start recordingDirect TV RecSpeaker SelectionVIERA Link MenuHome CinemaStartVIERA Link ControlSpeaker Selection Home CinemaRecorderPause Live TVselectstartYou can also start recording directly● DIRECT TV RECTo stop recording■Select “Stop” in “Direct TV Rec” and accessDirect TV RecSpeaker SelectionVIERA Link MenuHome CinemaStopVIERA Link ControlSpeaker Selection Home CinemaRecorderPause Live TV selectstopYou can also stop recording directly.● Unlock the tunerGUIDEUnlockContinueTuner LockedPlease stop recording to operateEXITFeatures available■ (Using VIERA Link Menu)Features available■Reduce unnecessary power consumption in standby Standby Power SaveSet Standby Power Save “On” in the Setup Menu to use this function“Standby Power Save” (p. 34)The power consumption in Standby mode of the connected equipment is controlled higher or lower insynchronization with the TV On / Off state to reduce the consumption.When the TV is set to Standby mode, the connected equipment is automatically set to Standby and the powerconsumption in Standby mode of the connected equipment is automatically minimized.When the TV is turned on, the connected equipment is still in Standby mode, but the power consumption isincreased to make startup time early.This function is effective if the connected equipment can change the power consumption in Standby mode●and is set to higher consumption.This function will work when “Power off Link” is set to “On”.●Auto standby for unnecessary equipment Intelligent Auto StandbySet Intelligent Auto Standby “On (With reminder)” or “On (No reminder)” in the Setup Menu touse this function“Intelligent Auto Standby” (p. 34)When the TV is On, non-watched or non-used connected equipment goes into Standby mode automaticallyto reduce the power consumption. For example, when the input mode is switched from HDMI, when SpeakerSelection is changed to “TV” (except for watching a disc).If you select “On (With reminder)”, the on screen message will be displayed to be noticed before working this●function.This function may not work properly depending on the connected equipment. If required, set to “Off”.●