Panasonic Viera TXL32C20EA Operating Instructions Manual

Also see for TX-L32C2E: Service manual

DIRECT TV RECASPECTOPTIONTEXTPROGRAMMESTTL INDEX HOLDNAVEXITRETURNINPUTTVjklghi mnotuvpqrs wxyzabc defMENU341 Select DVB-C or DVB-Tp. 14TV2 Display the menu MENU3 Select “Setup”Main MenuPictureSoundSetupaccessselect4 Select “DVB-C Tuning Menu” or “DVB-T Tuning Menu”Setup Menu 1/2Off Timer OffAccessAccessLink SettingsChild LockDVB-T Tuning MenuDVB-C Tuning MenuLanguageDisplay SettingsCommon InterfaceSystem MenuTimer Programmingaccessselect“DVB-C Tuning Menu” is available in DVB-C mode only.“DVB-T Tuning Menu” is available in DVB-T mode only.5 Select one of the following functions and setDVB-C Tuning MenuFavourites Edit AccessChannel ListAuto SetupManual TuningUpdate Channel ListNew Channel MessageSignal ConditionAccessAccessAccessAccessOnAccessAttenuator OffAuto Setup “Retuning from Setup Menu” (p. 32 and p. 33)accessselectThe function items vary depending on the country you select (p. 12).You can retune channels or make your favourite channel lists, skip unwanted channels, etc.To return to TV EXITTuning and Editing Channels(DVB)Update DVB channel automatically Update Channel ListYou can add new channels, delete removed channels, update channel name and position automatically toChannel List.DVB-T Update Channel ListCH Channel Name Type QualitySearchingThis will take about 3 minutes.Free TV: 0Progress CH 5 69Pay TV: 0 Radio: 0Channel List is updated with keeping your settings in Favourites Edit, Channel List, Child Lock, etc.Display a notification message New Channel MessageSelects whether to give a notification message when a new DVB channel is found. (Off / On)New channels found!Press OK to update channel listPress EXIT to ignore.Selecting OK will perform “Update Channel List”.Check DVB signal Signal ConditionSelects a channel and checks the DVB signal condition. To change the channelDVB-T Signal ConditionChannel Name 70 CBBC ChannelSignal QualitySignal StrengthNetwork Name0 100 10WenvoeBit Error Rate 0.00E+00Parameter [CH62] 802 MHzA good Signal Strength is not an indication of suitable signal for DVB reception.Please use the Signal Quality indicator as follows:Signal Quality:Green bar GoodYellow bar PoorRed bar Bad (Check the Terrestrial aerial or cable)Reduce the DVB-C signal AttenuatorIf the DVB-C signal is too strong, the interference may occur. In this case set to “On” to reduce the signalautomatically.This function is available only for DVB-C signal.