Panasonic Viera VT60P Series Operating Instructions Manual

Contents

201 Turn the 3D Eyewear on and put it onConnection status and battery status are displayed on the bottom right of the screen.2 View the 3D imagesSafety precautions will be displayed when you first watch the 3D image. Select [Yes] or [No] to continue to view3D images.Note● Turn off the 3D Eyewear after using it.● Use the 3D Eyewear within approximately 3.2 m from the TV. You cannot view the 3D images with the 3D Eyeweartoo far from the TV, because of the difficulty of receiving radio waves from the TV.● The range may be shortened depending on the obstacles between the TV and the 3D Eyewear, or the surroundingenvironment.● Use the 3D Eyewear where there is no interference from other Bluetooth devices.● 3D content will not be correctly visible if the 3D Eyewear is worn upside down or back-to-front.● When viewing 3D images, make sure your eyes are at an approximately horizontal level and keep a position whereyou do not see double images.● If light appears to flicker under fluorescents or dimmers when using the 3D Eyewear, change the setting of [3DRefresh Rate] in [3D Settings] (Picture Menu).● There are differences in the viewing range of the 3D Eyewear among individuals.MaintenanceFirst, remove the mains plug from the socket outlet.Display panel, Cabinet, PedestalRegular care:Gently wipe the surface of the display panel, cabinet, or pedestal by using a soft cloth to clean the dirt or fingerprints.For stubborn dirt:First clean the dust on the surface. Dampen a soft cloth with clean water or diluted neutral detergent (1 part detergentto 100 parts water). Wring the cloth and wipe the surface. Finally, wipe away all the moisture.Caution● Do not use a hard cloth or rub the surface too hard, otherwise this may cause scratches on the surface.● Take care not to subject the TV’s surfaces to water or detergent. Liquid inside the TV could lead to product failure.● Take care not to subject the surfaces to insect repellent, solvent, thinner or other volatile substances. This maydegrade surface quality or cause peeling of the paint.● The surface of the display panel is specially treated and may be easily damaged. Take care not to tap or scratch thesurface with your fingernail or other hard objects.● Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time. This maydegrade surface quality.Mains plugWipe the mains plug with a dry cloth at regular intervals. Moisture and dust may cause fire or electrical shock.