16UserWeekly timer settingPromotes energy saving by allowing you to set up to 6programmes in any given day.Indicates the next timer operationprogrammeDay to be selectedIndicates the next timeroperation dayProgramme number in a dayOFF TimerON TimerLights up if Timer operation is selected1 sserP to enter the timer setting mode.2 sserP or to select your desired day.3 sserP to confirm your selection.4 sserp,gniknilbeblliw”1“ to setprogramme 1.5 Press to select ON or OFF timer.6 sserP or to select your desired time.You can set , , and the WaterTemperature Thermo Shift setting.7 sserP to confirm programme 1. The selectedday will be highlighted with ▼.• After 2 seconds, the display will move to thenext programme. Repeat steps 4 to 7 to setprogrammes 2 to 6.• During timer setup, if no button is pressed within30 seconds, or if the is pressed, the setting atthat moment is confirmed and timer setup is ended.To check current timer programme1 sserP to enter timer mode and pressto enter day setting.2 sserP or until your desired day is shown,press to confirm your selection.3 sserP or to check the set programmes.To modify current timer programmeor add new timer programme1 Perform steps 1 to 7 of “Weekly timersetting” to modify existing timer programme, oradd any timer programme.To cancel current timer programme1 sserP to enter day.2 sserP or until your desired day is shown,press to enter programme setting.3 sserP or until your desired day is shown.Press to cancel the programme and ▼ willdisappear.To disable/enable Weekly Timer• To disable weekly timer setting, press , thenpress .• To enable previous weekly timer setting, press ,then press .Dealer Operation/settings to be done only by the authorised dealer/specialist.User Operation/settings to be done by the authorised dealer/specialist or user.■ Note:• You may set the timer for each day of the week (Monday to Sunday) with 6 programmes per day.• When the system is switched on by the timer, it will use the previously set temperature to control the water outlettemperature.• The same timer programme cannot be set on the same day.• You may also select 2 or more days with the same timer setting.