Panasonic WH-UD09HE5 Operating Instructions Manual

Also see for WH-SDC07H3E5: Quick guide Service manual

Contents

English19Menu Default Setting Setting Options / DisplayInstaller setup Operation setup2 HeatTo set various water & ambienttemperatures for heating. Water temp. for heating ON /Outdoor temp. for heating OFF /T for heating ON /Outdoor temp. for heater ONWater temp. for heating ONCompensationcurveHeating ONtemperatures incompensation curve ordirect input.Water temp. for heating ON Compensation curveX axis: -5 °C, 15 °CY axis: 55 °C, 35 °CInput the 4 temperaturepoints(2 on horizontal X axis,2 on vertical Y axis).• Temperature range: X axis: -15 °C ~ 15 °C, Y axis: See below• Temperature range for the Y axis input:1. If High water temperature is NO: 20 °C ~ 55 °C2. If High water temperature is YES & Back up heater is enabled: 25 °C ~ 65 °C3. If High water temperature is YES & Back up heater is disabled: 35 °C ~ 65 °C• If 2 zone system is selected, the 4 temperature points must also be input for Zone 2.• “Zone 1” and “Zone 2” will not appear on the display if only 1 zone system.Water temp. for heating ON Direct35 °C Temperature for heatingON• Min. ~ Max. range is conditional as follows:1. If High water temperature is NO: 20 °C ~ 55 °C2. If High water temperature is YES & Back up heater is enabled: 25 °C ~ 65 °C3. If High water temperature is YES & Back up heater is disabled: 35 °C ~ 65 °COutdoor temp. for heating OFF24 °C Temperature for heatingOFFMenus