Panasonic WJ-HD100 Operating Instructions Manual

Also see for WJHD100 - DIGITAL DISC RECORDE: Specifications Operating instructions Specification sheet Operating instructions

Panasonic WJ-HD100 Operating Instructions Manual Manual pdf 33 page image

34DISPLAY SELECT STOP PLAY RECPUSH– PAUSE SETALARM SEARCH STEP REW/FFPLAY MODE SELECT/ // /SETU/ESCLCD CONTRASTDigital Disk Recorder WJ-HD2 1 Recording Manual RecordingRecording is possible at any time except during the setupoperation. The video supplied to the input terminal isrecorded with the recording mode, field rate and picturequality preset in the REC SETUP menu.1. Press the [ REC] button to start recording.2. Press the [ STOP] button to stop recording.Press the LCD button to the right or left to toggle betweenthe mode and capacity displays. The displays changeboth on the LCD and on the monitor while recording.Press the LCD button upward or downward to display the[RECTIME INFO.]. The remaining time and the total avail-able recording time are displayed on the LCD. Internal Timer RecordingInternal timer recording begins when the reserved start timecomes, and continues until the reserved end time comes.The reservations are made in the INTERNAL TIMER RECmenu (page 29).1. Press the LCD button downward to display [Timer REC]on the LCD.2. Press the LCD button to the right or left to select [INT],[EXT] or [OFF]. The default value is OFF.[OFF]: Reservations are made but not implemented.[INT]: The internal timer triggers recording at thereserved times.[EXT]: Enables power-on recording with the use of anexternal timer switch. Power-on recording isdetailed as follows.DISPLAY SELECTLCD CONTRASTFor power-on recording select [EXT] in the above procedureswith the LCD button. This enables the unit to start recordingevery day at a specific time with use of a timer switch thatcontrols the AC mains supplied to the unit. Make certain tokeep the POWER switch on the rear of the unit set to ON.Note: When [EXT] is selected for power-on recording,reserved recording is disabled. Alarm Recording Power-on RecordingAlarm recording starts when an externally connected sen-sor is turned on, or the built-in VMD (Video Motion Detector)is activated.OPERATETIMER HDDALARMSUSPENDDAYLIGHTSAVINGFULLLOCKMEMORY CARD DISPLAY SELECT STOP PLAY RECPUSH– PAUSE SETALARM SEARCH STEP REW/FFPLAY MODE SELECT/ // /SETU/ESCLCD CONTRASTDigital Disk Recorder WJ-HDTimerSwitchAC MainsOPERATETIMER HDDALARMSUSPENDDAYLIGHTSAVINGSFULLLOCKMEMORY CARD DISPLAY SELECT STOP PLAY RECPUSH– PAUSE SETALARM SEARCH STEP REW/FFPLAY MODE SELECT/ // /SETU/ESCLCD CONTRASTDigital Disk Recorder WJ-HDSensorBuilt-inVMDNote: A reserved recording will interrupt playback and startat the reserved start time.DISPLAY SELECTLCD CONTRASTDISPLAY SELECTLCD CONTRASTRemaining available time Total available recording time